37,888
edits
S-311: Difference between revisions
Jump to navigation
Jump to search
m
clean up
No edit summary |
m (clean up) |
||
| Line 1: | Line 1: | ||
The '''Tektronix Type S-311''' Programmable Dual-Trace Sampling Plug-In Unit | {{Plugin Sidebar | ||
is a [[560-series plug-ins|560-series plug-in]] designed for use in a [[567]] | |manufacturer=Tektronix | ||
|series=560-series scopes | |||
|type=S-311 | |||
|summary=Programmable Dual-Trace Sampling Plug-In Unit | |||
|image=Tek s-311 photo.png | |||
|caption=S-311 Front view | |||
|introduced=(?) | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* ''please add'' | |||
}} | |||
The '''Tektronix Type S-311''' Programmable Dual-Trace Sampling Plug-In Unit is a [[560-series plug-ins|560-series plug-in]] designed for use in a [[567]] | |||
as part of a Tektronix [[S-2000]] and [[S-3000]] series automated test systems. | as part of a Tektronix [[S-2000]] and [[S-3000]] series automated test systems. | ||
In contrast to the [[3S6]] which uses external sampling heads, | In contrast to the [[3S6]] which uses external sampling heads, the S-311 contains two samplers internally, like the [[3S76]] or [[3S1]]. | ||
the S-311 contains two samplers internally, like the [[3S76]] or [[3S1]]. | However, unlike the 3S76 and 3S1, the S-311 gets its signal inputs via [[BNC connector]]s on the rear panel. | ||
However, unlike the 3S76 and 3S1, the S-311 gets its signal inputs via | |||
[[BNC connector]]s on the rear panel. | |||
The input impedance of each input is 50 Ω. | The input impedance of each input is 50 Ω. | ||
When the S-311 is inserted into the mainframe, its BNC input connectors must be manually connected, | When the S-311 is inserted into the mainframe, its BNC input connectors must be manually connected, as they are not designed to pair with a corresponding connector in the plug-in bay bulkhead. The [[567]] mainframe has holes in the plug-in bay bulkhead at the location | ||
as they are not designed to pair with a corresponding connector in the plug-in bay bulkhead. | |||
The [[567]] mainframe has holes in the plug-in bay bulkhead at the location | |||
of the signal input connectors and programming connector of the S-311. | of the signal input connectors and programming connector of the S-311. | ||
The remote programmability of the S-311 typically involves a [[262|Type 262 programmer]]. | The remote programmability of the S-311 typically involves a [[262|Type 262 programmer]]. | ||
Remote programming can control the mV/div, voltage offset, and mode, | Remote programming can control the mV/div, voltage offset, and mode, i.e., channel A, channel B, or dual-trace. | ||
i.e., channel A, channel B, or dual-trace. | |||
The Type 262 controls the DC currents in the coils of six reed relays in the S-311. | The Type 262 controls the DC currents in the coils of six reed relays in the S-311. | ||
The S-311 can be thought of as a [[3S76]] with remote programmability, | The S-311 can be thought of as a [[3S76]] with remote programmability, connectors on the rear, no delay, and no trigger pickoff. | ||
connectors on the rear, no delay, and no trigger pickoff. | |||
Component numbers are the same in the two models. | Component numbers are the same in the two models. | ||
The S-311 and 3S76 both have 0.4 nanosecond risetimes. | The S-311 and 3S76 both have 0.4 nanosecond risetimes. | ||
| Line 26: | Line 32: | ||
The S-311 does not contain a signal delay. | The S-311 does not contain a signal delay. | ||
The BNC signal input connectors on the rear panel of the S-311 | The BNC signal input connectors on the rear panel of the S-311 are connected by short coaxial cables to the sampling bridge. | ||
are connected by short coaxial cables to the sampling bridge. | |||
==Manuals == | ==Manuals == | ||
* [[Media:070-0468-01.pdf|Tektronix S-311 Manual (PDF)]] | * [[Media:070-0468-01.pdf|Tektronix S-311 Manual (PDF)]] | ||
==Pictures == | ==Pictures == | ||
<gallery> | <gallery> | ||