39,728
edits
DF1: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
The '''Tektronix DF1''' is a display formatter for use with the [[7D01]] logic analyzer. It adds "data domain displays" (binary, octal and hexadecimal state tables, and a function map display) to the 7D01's time-domain display. It can store a reference table, to which the captured data can be compared. | The '''Tektronix DF1''' is a display formatter for use with the [[7D01]] logic analyzer. It adds "data domain displays" (binary, octal and hexadecimal state tables, and a function map display) to the 7D01's time-domain display. It can store a reference table, to which the captured data can be compared. | ||
Project manager for the DF1 was [[Murlan Kaufman]]. | |||
The DF01 attaches to the 7D01 through a 50-pin [[D-sub connector]] on the right side panel only, it has no direct connection to the scope mainframe. The DF1 and 7D01 are mechanically coupled by three nylon standoffs that slide into cutouts in the 7D01's case rails. The bottom two standoffs are fixed and are inserted first, then the connector is plugged in and the third, sliding, stand-off at the top is moved to its locked position. | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
| Line 32: | Line 32: | ||
* Duration — 100 μs within 50 μs when used with the 7D01 internal read clock.}} | * Duration — 100 μs within 50 μs when used with the 7D01 internal read clock.}} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
==Internals== | |||
The DF1 is built around a [[Motorola 6800]] microprocessor with two 2K×8 masked ROMs and sixteen 1K×1 SRAMs (2101). | |||
==Pictures== | ==Pictures== | ||