S-53: Difference between revisions

Jump to navigation Jump to search
7 bytes added ,  28 November 2021
no edit summary
No edit summary
No edit summary
Line 10: Line 10:
|designers=
|designers=
|manuals=
|manuals=
* [http://w140.com/tek_s53_oct1987.pdf Tektronix S-53 Manual (October 1987, good quality, PDF)]
* [[Media:070-1147-00.pdf|Tektronix S-53 Manual]], Oct 1987
* [http://w140.com/tek_s53.pdf Tektronix S-53 Manual (bad text, good schematic) (PDF)]
* [https://w140.com/tek_s53_sch.png S-53 Schematic] (PNG)
* [http://w140.com/tek_s53_good.pdf Tektronix S-53 Manual (good text, bad schematic) (PDF)]
<small>
* [http://w140.com/tek_s53_sch.png Tektronix S-53 Schematic (PNG)]
''Alternate copies''
* [https://w140.com/tek_s53.pdf Tektronix S-53 Manual (bad text, good schematic)]
* [https://w140.com/tek_s53_good.pdf Tektronix S-53 Manual (good text, bad schematic)]
</small>
}}
}}
The Tektronix S-53 '''Trigger Recognizer''' head can be used in the right bay of the [[7S12]] TDR/Sampler plug-in  
The Tektronix S-53 '''Trigger Recognizer''' head can be used in the right bay of the [[7S12|7S12 TDR/Sampler plug-in]]
or externally in a type [[285]] enclosure. It essentially contains the entire trigger circuit of an oscilloscope.   
or externally in a type [[285]] enclosure. It essentially contains the entire trigger circuit of an oscilloscope.   


Line 24: Line 27:
{{Spec | Jitter | max. 15 ps or less (from input signal to trigger-out) }}
{{Spec | Jitter | max. 15 ps or less (from input signal to trigger-out) }}
{{Spec | Delay | 15 ns (from input signal to trigger-out) }}
{{Spec | Delay | 15 ns (from input signal to trigger-out) }}
{{Spec | Trigger-out signal | 1 V into 50 Ω with 600 mV/ns slew rate }}
{{Spec | Trigger-out signal | 1 V into 50 Ω with 600 mV/ns slew rate, [[BSM connector]] }}
{{EndSpecs}}
{{EndSpecs}}


Navigation menu