067-0405-00: Difference between revisions

067-0405-00 (view source)

1 byte added , 27 September 2022

no edit summary

39,717

edits

@@ Line 12: / Line 12: @@
 * [[Media:071-0730-05.pdf|067-0405-02 Instruction Manual 071-0730-05]]
 }}
+The '''Tektronix 067-0405-0x series of cal/deskew fixtures''' convert the TDS7000 Series PROBE COMPENSATION output into a set of test points that give you a convenient way to:
+* Compensate a passive probe (low-frequency)
+* Optimize the oscilloscope gain and offset accuracy at the probe tip
+* Compensate for timing differences between two, three, or four voltage probes (deskew)
+* Compensate for timing differences between one, two, or three voltage probes and a current probe (deskew)
-The 067-0405-0x series of cal/deskew fixtures convert the TDS7000 Series PROBE COMPENSATION output into a set of test points that give you a convenient way to:
+It is supplied with a 10" 50 Ω BNC cable, part number [[012-0208-00]].
-* Compensate a passive probe (low-frequency).
-* Optimize the oscilloscope gain and offset accuracy at the probe tip.
-* Compensate for timing differences between two, three, or four voltage probes (deskew).
-* Compensate for timing differences between one, two, or three voltage probes and a current probe (deskew).
-It is supplied with a 10" 50 Ω BNC cable, part number [[012-0208-00]]
 ==Pictures==
 <gallery>
+-0405-00_1.jpg
-File:067-0405-00_1.jpg
+-0405-00_2.jpg
-File:067-0405-00_2.jpg
 </gallery>
 [[Category:Calibration fixtures]]