39,764
edits
1S1: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
|designers=Gene Cowan;Chuck Edgar | |designers=Gene Cowan;Chuck Edgar | ||
|manuals= | |manuals= | ||
* [[Media:070-0475-00.pdf|Tektronix 1S1 Manual ( | * [[Media:070-0475-00.pdf|Tektronix 1S1 Manual] (retouched) | ||
* [ | * [https://bama.edebris.com/download/tek/1s1/1s1.djvu Tektronix 1S1 Manual] (DjVu @ BAMA) | ||
* [ | * [https://w140.com/1s1.pdf Tektronix 1S1 Manual] | ||
* [[Media:tek_1s1_field_training_package.pdf|Tektronix 1S1 Field Training Package]] (OCR) | * [[Media:tek_1s1_field_training_package.pdf|Tektronix 1S1 Field Training Package]] (OCR) | ||
| Line 21: | Line 21: | ||
It is essentially one channel of a sampling unit and a timing unit from a [[661]]. It has its own trigger and timebase. | It is essentially one channel of a sampling unit and a timing unit from a [[661]]. It has its own trigger and timebase. | ||
The oscilloscope's timebase is usually set to a relatively slow sweep rate when using a 1S1. Alternatively, the sweep | The oscilloscope's timebase is usually set to a relatively slow sweep rate when using a 1S1. Alternatively, the sweep on the oscilloscope can free-run, and the horizontal voltage from the oscilloscope can be used to control the 1S1, as described below. | ||
on the oscilloscope can free-run, and the horizontal voltage from the oscilloscope can be used to control the 1S1, as described below. | |||
The 1S1 has a 50 Ω [[GR-874 connector]] for the signal input. The plug-in supplies power (+100 V and −12.6 V) to accessories like | The 1S1 has a 50 Ω [[GR-874 connector]] for the signal input. The plug-in supplies power | ||
the [[P6032]] Cathode Follower Probe, the [[281]] | (+100 V and −12.6 V) to accessories like the [[P6032]] Cathode Follower Probe, the | ||
allow the use of high-impedance probes with the 50 Ω input of the 1S1 (at reduced bandwidth). | [[281|281 TDR Pulser]], and the [[282|Type 282 Probe Adapter]], which is an active buffer | ||
to allow the use of high-impedance probes with the 50 Ω input of the 1S1 (at reduced bandwidth). | |||
{{MissingSpecs}} | {{MissingSpecs}} | ||