1,989
edits
No edit summary |
No edit summary |
||
Line 27: | Line 27: | ||
The P6021 shorts this ring to ground, directly switching three relays connected to −15 V internally. When connecting a [[P6019]] probe, the ring must also be grounded but the probe connector does not have the matching pin. The [[131-0750-00]] adapter solves this problem. | The P6021 shorts this ring to ground, directly switching three relays connected to −15 V internally. When connecting a [[P6019]] probe, the ring must also be grounded but the probe connector does not have the matching pin. The [[131-0750-00]] adapter solves this problem. | ||
The front panel gain and low frequency compensation screwdriver adjustments | The front panel gain and low frequency compensation screwdriver adjustments do not differentiate between the P6021 or P6022 probes, i.e. swapping probes requires re-adjustment. Note that the low frequency compensation adjustment has a large impact on waveform accuracy and requires careful adjustment to a certain slope when using a 1 kHz calibrator signal as discussed in the manual. | ||
==Links== | ==Links== |
edits