7CT1N: Difference between revisions

7CT1N (view source)

239 bytes added , 5 May 2014

no edit summary

36,756

edits

@@ Line 1: / Line 1: @@
-The 7CT1N is a curve tracer plug-in for [[7000-series scopes]].
+The 7CT1N is a [[curve tracer]] plug-in for [[7000-series scopes]].
+==Specifications==
+* peak DUT power 500 mW
+==Manuals==
 * [http://bama.edebris.com/download/tek/7ct1n/tek-7ct1n.pdf Tektronix 7CT1N Manual (PDF)]
 * [http://w140.com/smb/7ct1n_sm.pdf Tektronix 7CT1N Manual (OCR, PDF)]
+==Links==
+* http://amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/7CT1N_curve_tracer.htm
+==Common Problems==
+C30 and C32 (100 uF, 25V)have a tendency to leak or short, causing associated resistors R30 and R32 (240, .25W, 5%) to overheat and fail. A good preventative maintenance procedure would be to replace these two capacitors with modern equivalents. Three 7CT1N units purchased online had this fault, and replacement of the capacitors and resistors restored proper operation.
+==Pictures==
 <gallery>
 Image:7CT1N_inside.jpg
 </gallery>
-Common Problems
-C30 and C32 (100 uF, 25V)have a tendency to leak or short, causing associated resistors R30 and R32 (240, .25W, 5%) to overheat and fail. A good preventative maintenance procedure would be to replace these two capacitors with modern equivalents. Three 7CT1N units purchased online had this fault, and replacement of the capacitors and resistors restored proper operation.
+__NOTOC__
+[[Category:Specifications needed]]