39,764
edits
DC503/Repairs: Difference between revisions
Jump to navigation
Jump to search
no edit summary
(Created page with "==Repair Issues== * If no LED or display segment is lit after trun on, check for +15 V from U500 Voltage regulator IC type 723. * All ICs are placed in IC sockets. Contact pr...") |
No edit summary |
||
| Line 1: | Line 1: | ||
==Repair Issues== | ==Repair Issues== | ||
* If no LED or display segment is lit after trun on, check for +15 V from U500 Voltage regulator IC type 723. | * If no LED or display segment is lit after trun on, check for +15 V from U500 Voltage regulator IC type 723. | ||
* All ICs are placed in IC sockets. Contact problems can occur. Removing and inserting ICs helps. | * All ICs are placed in IC sockets. [[bad TI IC sockets|Contact problems can occur]]. Removing and inserting ICs helps. | ||
* Check board is mounted to frame with plastic washers in between near pcb conductor tracks, otherwise a short to GND can occur. | * Check board is mounted to frame with plastic washers in between near pcb conductor tracks, otherwise a short to GND can occur. | ||
[[Category:Instrument repair reports]] | [[Category:Instrument repair reports]] | ||