119
edits
FG501: Difference between revisions
Jump to navigation
Jump to search
Added some more details
No edit summary |
(Added some more details) |
||
| Line 10: | Line 10: | ||
}} | }} | ||
The TRIG OUT signal is available on the front panel via a [[BSM|BSM female connector]]. | The TRIG OUT signal is available on the front panel via a [[BSM|BSM female connector]]. | ||
The FG501 is specified at a max frequency of 1 MHz, while the "A" model is specified at 2 MHz. The FG501 features seven different functions: Sine, Triangle, Square, +Ramp, -Ramp, 50%>duty square, 50%<duty. The Duty cycle of the Ramp and pulses (not square) are determined by the equation 1/2,,f,, where the veriable ,,f,, represents frequency. | |||
The "A" model features only 3 functions: Sine, Triangle, Square. But the other absent functions compensated with a variable symmetry function, effectively allowing the same functionality with only three functions. The "A" model also features an attenuator, not found in the non-"A" model. | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{SpecGroup | FG501 }} | {{SpecGroup | FG501 }} | ||
{{Spec | Frequency | 0.01 Hz to 1 MHz in decade steps }} | {{Spec | Frequency | 0.01 Hz to 1 MHz in decade steps}} | ||
{{Spec | Output | Max. 20 V<sub>p-p</sub> into high impedance, 10 V into 50 Ω (SN < B130000: 15/7.5 V)}} | {{Spec | Output | Max. 20 V<sub>p-p</sub> into high impedance, 10 V into 50 Ω (SN < B130000: 15/7.5 V)}} | ||
{{Spec | Offset | Max. ±7.5 V<sub>p-p</sub> into high impedance, 5 V into 50 Ω (SN < B130000: 5/2.5 V }} | {{Spec | Offset | Max. ±7.5 V<sub>p-p</sub> into high impedance, 5 V into 50 Ω (SN < B130000: 5/2.5 V }} | ||