38,869
edits
No edit summary |
No edit summary |
||
Line 20: | Line 20: | ||
The '''Tektronix 134''' current probe amplifier interfaces a [[P6019]], [[P6020]], [[P6021]] or [[P6022]] current probe to the voltage input of an oscilloscope. It also has a VOLTS ONLY setting of the input attenuator switch that provides a voltage gain of 125 or 50, depending on the position of the probe selector switch, with a 50 Ω input impedance. It was designed by [[Hans Springer]]. Early versions, up thru S/N 6539, had the switch positions labeled only for the [[P6019]] & [[P6020]] probes but these early versions are still compatible with the later [[P6021]] & [[P6022]] probes introduced in 1969. | The '''Tektronix 134''' current probe amplifier interfaces a [[P6019]], [[P6020]], [[P6021]] or [[P6022]] current probe to the voltage input of an oscilloscope. It also has a VOLTS ONLY setting of the input attenuator switch that provides a voltage gain of 125 or 50, depending on the position of the probe selector switch, with a 50 Ω input impedance. It was designed by [[Hans Springer]]. Early versions, up thru S/N 6539, had the switch positions labeled only for the [[P6019]] & [[P6020]] probes but these early versions are still compatible with the later [[P6021]] & [[P6022]] probes introduced in 1969. | ||
Each 134 came with its own separate, dedicated power supply using the same Tektronix proprietary coaxial connector as that used in the | Each 134 came with its own separate, dedicated power supply using the same Tektronix proprietary coaxial connector as that used in the [[131|Type 131s]] and its [[015-027|power supplies ]], but the 131 and 134 power supplies are ''not'' interchangeable. For more information on the power supplies for the Type 134, see the separate Type [[015-0058-01|015-0058-01 Power Supply]] page. | ||
{{BeginSpecs}} | {{BeginSpecs}} |