5110: Difference between revisions

5110 (view source)

136 bytes added , 20 May 2014

@@ Line 1: / Line 1: @@
 The Tektronix 5110 is a 5000-series three-bay mainframe.
-Earlier incarnations of it were known as [[5103|5103N]] and [[D10]].
-It has a large 8x10 division CRT screen where each division is 0.5 inch (12.6 mm) instead of the standard 1cm per division.
-It is specified to have a 2 MHz bandwidth with a [[5A18|5A18N]].
-The phase difference between X and Y channels is specified to be less than 1 degree at 100 kHz.
-P31 [[phosphor]] was standard.  P7 and P11 were optional.
-The CRT acceleration voltage is 3500 volts.
-There is no post-deflection acceleration.
+Earlier incarnations of it were known as [[5103|5103N]] and [[D10]].  It has a large 8&times;10 division CRT screen where each division is 0.5 in (12.6 mm) instead of the standard 1 cm per division.
+It is specified to have a 2 MHz bandwidth with a [[5A18|5A18N]] vertical plug-in.
+The phase difference between X and Y channels is specified to be less than 1 degree at 100 kHz.
+P31 [[phosphor]] was standard.  P7 and P11 were optional. CRT acceleration voltage is 3,500 V.  There is no post-deflection acceleration.
+==Manuals==
 * [http://w140.com/tektronix_5110_oscilloscope.pdf Tektronix 5110 Manual (PDF)]
+==Pictures==
 <gallery>
 File:Tek 5110.jpg
 </gallery>
+[[Category:5000 series non-storage mainframes]]
+[[Category:Specifications needed]]