TDS3014: Difference between revisions

Jump to navigation Jump to search

TDS3014 (view source)

Revision as of 03:48, 23 September 2024

255 bytes removed ,  23 September
no edit summary
(Link to USB floppy emulator instructions)
No edit summary
Line 1: Line 1:
{{Oscilloscope Sidebar |manufacturer=Tektronix |series=TDS series scopes|designers= |
{{Oscilloscope Sidebar
model= TDS3014 |
|manufacturer=Tektronix
summary=Digital Storage 100 MHz 4-channel scope |
|series=TDS series scopes
image=TDS3014 Waveform image.jpg |
|model=TDS3014
caption=Tektronix TDS3014 |
|summary=Digital Storage 100 MHz 4-channel scope
introduced=1998 |
|image=TDS3014 Waveform image.jpg
discontinued=(?) |
|caption=Tektronix TDS3014
|introduced=1998
|discontinued=(?)
manuals=
manuals=
* [[Media: 071-0274-01.pdf| 071-0274-01 TDS3000 Series User Manual]] (1.4 MB, PDF)
* [[Media: 071-0274-01.pdf| 071-0274-01 TDS3000 Series User Manual]]
* [[Media: 071-0382-01.pdf| 071-0382-01 TDS3000 Series Service Manual]] (1.5 MB, PDF)
* [[Media: 071-0382-01.pdf| 071-0382-01 TDS3000 Series Service Manual]]
* [[Media: TDS3000C Series Datasheet.pdf| TDS3000C Series Datasheet]] (786 KB, PDF)
* [[Media: TDS3000C Series Datasheet.pdf| TDS3000C Series Datasheet]]
}}
}}
The '''Tektronix TDS3014''' is a four-channel, 100 MHz, 1.25 GS/s digital phosphor oscilloscope with a TFT color screen.  This series of scopes combines 3,600 wfms/s continuous waveform capture rate and real-time intensity grading so you can see the problem and solve it.  This series of scope can run without AC power for up to three hours when TDS3BATC rechargeable lithium ion battery pack is installed.
The '''Tektronix TDS3014''' is a four-channel, 100 MHz, 1.25 GS/s digital phosphor oscilloscope with a TFT color screen.


Besides the channel inputs and the EXT TRIG input (two-channel models only), a [[Floppy]] Disk Drive and Centronics [[Parallel printer interface]] was available on the original and B version of this oscilloscope series until the C version which replaced the [[Floppy]] with a [[USB connector]] drive, and [[Parallel printer interface]] was removed altogether.  Optional Communication Modules were available such as the TDS3GM (GPIB/RS-232), TDS3VM ([[VGA Connector]]/[[RS-232 interface]]), TDS3EM ([[Ethernet]]/[[RS-232 interface]]), TDS3GV ([[GPIB]], [[RS-232 interface]]/[[VGA Connector]]), and the TDS3SDI 601 Serial/Digital Video Module.
This series of scopes combines 3,600 waveforms/s capture rate and real-time intensity grading.  It can run without AC power for up to three hours when TDS3BATC rechargeable lithium ion battery pack is installed.


Up to four Applications modules can be added into the small door in the upper right corner to transform the oscilloscope into a specialized instrument for limit testing, telecommunications mask testing, and video troubleshooting.  The [[TDS3AAM]] Advanced Analysis Module, TDS3LIM Limit Testing Module, TDS3TMT Telecommunications Mask Testing Module, and the TDS3VID Extended Video Analysis Module were available for added functionality. The TDS3TRG (Advanced Trigger) and TDS3FFT (Fast Fourier Transform) application modules were available in the original model of this oscilloscope series but made standard on the B and higher versions. 
Besides the channel inputs and the EXT TRIG input (two-channel models only), a [[Floppy]] Disk Drive and Centronics [[Parallel printer interface]] was available on the original and B version of this oscilloscope series until the C version which replaced the [[Floppy]] with a [[USB connector]] drive, and [[Parallel printer interface]] was removed altogether.  Optional Communication Modules were available such as the [[TDS3GM]] (GPIB/RS-232), [[TDS3VM]] ([[VGA Connector]]/[[RS-232 interface]]), [[TDS3EM]] ([[Ethernet]]/[[RS-232 interface]]), [[TDS3GV]] ([[GPIB]], [[RS-232 interface]]/[[VGA Connector]]), and the [[TDS3SDI]] 601 Serial/Digital Video Module.


There are many options for signal acquisition, measurement, and analysis.  The Getting Started section of the User Manual is a great place to become familiar with the many functions available in the use of this sophisticated instrument.
Up to four Applications modules can be added into the small compartment in the upper right corner to transform the oscilloscope into a specialized instrument for limit testing, telecommunications mask testing, and video troubleshooting.  The [[TDS3AAM]] Advanced Analysis Module, [[TDS3LIM]] Limit Testing Module, [[TDS3TMT]] Telecommunications Mask Testing Module, and the [[TDS3VID]] Extended Video Analysis Module were available for added functionality.  The [[TDS3TRG]] (Advanced Trigger) and [[TDS3FFT]] (Fast Fourier Transform) application modules were available in the original model of this oscilloscope series but made standard on the B and higher versions.


{{BeginSpecs}}
{{BeginSpecs}}
Line 29: Line 31:


==Links==
==Links==
* [https://github.com/andrewpono/TDS3000-Series-Gotek-FlashFloppy Instructions on replacing the floppy drive with a USB emulator]
* [https://github.com/andrewpono/TDS3000-Series-Gotek-FlashFloppy Instructions on replacing the floppy drive with a USB emulator]
{{Documents|Link=TDS3014}}
{{PatentLinks|TDS3014}}


==Pictures==
==Pictures==
Line 37: Line 40:
TDS3014_2.JPG
TDS3014_2.JPG
TDS3014_3.JPG
TDS3014_3.JPG
Tek TSD3014 rear.jpg
</gallery>
</gallery>




[[Category:TDS3000 series scopes]]
[[Category:TDS3000 series scopes]]
Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/97394"

Navigation menu