500 Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 11: | Line 11: | ||
! Comment | ! Comment | ||
|- | |- | ||
| 1 || bgcolor="Yellow" | +Signal | | 1 || bgcolor="Yellow" | +Signal || 100 mV/cm, bias +67.5 V ±2% | ||
|- | |- | ||
| 2 || | Ground | | 2 || | Ground || | ||
|- | |- | ||
| 3 || bgcolor="Yellow" | −Signal | | 3 || bgcolor="Yellow" | −Signal || 100 mV/cm, bias +67.5 V ±2% | ||
|- | |- | ||
| 4 || | | 4 || bgcolor="Yellow" | Int Trig in || [[544]], [[546]], [[547]], [[555]] only | ||
|- | |- | ||
| 5 || | | 5 || bgcolor="Yellow" | Int Trig in || [[544]], [[546]], [[547]], [[555]] only | ||
|- | |- | ||
| 6 || | | | 6 || | n/c || | ||
|- | |- | ||
| 7 || | | 7 || bgcolor="LightGreen" | Slave Pulse out || [[547]] only | ||
|- | |- | ||
| 8 || bgcolor="LightGreen" | Multi-trace sync || Cathode | | 8 || bgcolor="LightGreen" | Multi-trace sync || Cathode; grounded by [[CA]], [[M]] etc. in Alt Trace mode | ||
|- | |- | ||
| 9 || bgcolor="Pink" | −150 V | | 9 || bgcolor="Pink" | −150 V || min. 3.8 mA, max. 60 mA | ||
|- | |- | ||
| 10 || bgcolor="Pink" | +100 V | | 10 || bgcolor="Pink" | +100 V || min. 4.5 mA, max. 50 mA | ||
|- | |- | ||
| 11 || bgcolor="Pink" | +225 V | | 11 || bgcolor="Pink" | +225 V || min. 16 mA, max. 75 mA | ||
|- | |- | ||
| 12 || bgcolor="Pink" | +350 V | | 12 || bgcolor="Pink" | +350 V || min. 0 mA, max. 20 mA | ||
|- | |- | ||
| 13 || bgcolor="LightBlue" | 6.3 V<sub>AC</sub> || plug-in AC heater supply | | 13 || bgcolor="LightBlue" | 6.3 V<sub>AC</sub> || plug-in AC heater supply, max. 2.8 A | ||
|- | |- | ||
| 14 || bgcolor="LightBlue" | 6.3 V<sub>AC</sub> || return for pin 13 | | 14 || bgcolor="LightBlue" | 6.3 V<sub>AC</sub> || return for pin 13 | ||
|- | |- | ||
| 15 || bgcolor="Pink" | +75 V | | 15 || bgcolor="Pink" | +75 V || min./max. 150 mA for DC series heaters and LV supply | ||
|- | |- | ||
| 16 || bgcolor="LightGreen" | Multi-trace sync | | 16 || bgcolor="LightGreen" | Multi-trace sync || Anode | ||
|} | |} | ||
Line 52: | Line 52: | ||
| bgcolor="LightBlue" | AC and heater power | | bgcolor="LightBlue" | AC and heater power | ||
|- | |- | ||
| bgcolor="Yellow" | Deflection | | bgcolor="Yellow" | Deflection and Trigger Signals | ||
|- | |- | ||
| bgcolor="LightGreen" | Control Signals | | bgcolor="LightGreen" | Control Signals |
Revision as of 06:17, 13 June 2018
The plug-in interface of the 500-series scopes is a single 16-pin Amphenol connector.
Pin-out
Pin | Function | Comment |
---|---|---|
1 | +Signal | 100 mV/cm, bias +67.5 V ±2% |
2 | Ground | |
3 | −Signal | 100 mV/cm, bias +67.5 V ±2% |
4 | Int Trig in | 544, 546, 547, 555 only |
5 | Int Trig in | 544, 546, 547, 555 only |
6 | n/c | |
7 | Slave Pulse out | 547 only |
8 | Multi-trace sync | Cathode; grounded by CA, M etc. in Alt Trace mode |
9 | −150 V | min. 3.8 mA, max. 60 mA |
10 | +100 V | min. 4.5 mA, max. 50 mA |
11 | +225 V | min. 16 mA, max. 75 mA |
12 | +350 V | min. 0 mA, max. 20 mA |
13 | 6.3 VAC | plug-in AC heater supply, max. 2.8 A |
14 | 6.3 VAC | return for pin 13 |
15 | +75 V | min./max. 150 mA for DC series heaters and LV supply |
16 | Multi-trace sync | Anode |
Pin group function legend
DC power AC and heater power Deflection and Trigger Signals Control Signals