7A16P: Difference between revisions

Revision as of 19:24, 12 August 2020

The Tektronix 7A16P is a single channel, programmable, vertical amplifier for 7000-series digitizing mainframes. All functions of the 7A16P can be remotely programmed via the GPIB 7000-series main interface bus, with exception of the variable gain control and the probe identify switch. It is special among the 7000-series vertical amplifiers since it offers a switchable 1 MΩ/50 Ω input impedance, only paralleled by the 7A42. The 7A16P is also unique as it has two input BNC connectors, but is strictly a single channel plugin.

It was mainly intended for use in the 7612D and the 7912 family, but can also be used in the 7854 if paired with a 021-0374-00 and internally modified by adding cables for a 18 pin header and setting jumpers correctly.

Key Specifications

Bandwidth 1 MΩ	0 – 150 MHz
Bandwidth 50 Ω	0 – 200 MHz
Deflection	10 mV/Div to 5 V/Div in 1–2–5 sequence
Input impedance	1 MΩ
Features	Two BNC inputs 20 MHz bandwidth limit switch Invert switch Probe multiplier / Identify switch sensing inputs

Internals

Links

Pictures

7A16P front panel
7A16P left internal
7A16P right internal
7A16P right internal modified with cables for connection to 021-0374-00.
7A16P right internal modified for 021-0374-00, detail.

Firmware (uploaded BIN files)

160-1511-00.bin (U30630 and U31630 in 7A16P)
160-1512-00.bin (U30830 and U31830 in 7A16P)

@@ Line 13: / Line 13: @@
 }}
-The '''Tektronix 7A16P''' is a single channel, programmable, vertical amplifier for [[:Category:7000_series_digitizer_mainframes|7000-series digitizing mainframes]]. All functions of the 7A16P can be remotely programmed via the [[GPIB]] 7000-series main interface bus, with exception of the variable gain control and the probe identify switch. It was mainly intended for use in the [[7612D]] and the [[7912|7912 family]], but can also be used in the [[7854]] if paired with a [[021-0374-00]] and internal jumpers are set correctly.
+The '''Tektronix 7A16P''' is a single channel, programmable, vertical amplifier for [[:Category:7000_series_digitizer_mainframes|7000-series digitizing mainframes]]. All functions of the 7A16P can be remotely programmed via the [[GPIB]] 7000-series main interface bus, with exception of the variable gain control and the probe identify switch. It is special among the 7000-series vertical amplifiers since it offers a switchable 1 MΩ/50 Ω input impedance, only paralleled by the [[7A42]]. The 7A16P is also unique as it has two input BNC connectors, but is strictly a single channel plugin.
+It was mainly intended for use in the [[7612D]] and the [[7912|7912 family]], but can also be used in the [[7854]] if paired with a [[021-0374-00]] and internally modified by adding cables for a 18 pin header and setting jumpers correctly.
 {{BeginSpecs}}