RSA3303: Difference between revisions
No edit summary |
No edit summary |
||
(10 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
{{ | {{Instrument Sidebar | ||
|class=Spectrum Analyzer | |||
summary=Spectrum Analyzer | |manufacturer=Tektronix | ||
image= RSA3303B_1.jpg | | |model=RSA3303B | ||
caption=Tektronix RSA3303B | | |summary=3 GHz Spectrum Analyzer | ||
introduced=(?) | | |image= RSA3303B_1.jpg | ||
discontinued=(?) | | |caption=Tektronix RSA3303B | ||
manuals= | |introduced=(?) | ||
|discontinued=(?) | |||
* [[Media: | |manuals= | ||
* [[Media: 071- | * [[Media:071-2395-00.pdf|RSA3303B, RSA3308B, RSA3408B User Manual]] (OCR) | ||
* [[Media: | * [[Media:071-2367-01.pdf|RSA3303B, RSA3308B Service Manual]] (OCR) | ||
* [[Media: 075-1028-00 | * [[Media:077-0111-00.pdf|RSA3303B, RSA3308B, RSA3408B Programmer Manual]] (OCR) | ||
* [[Media: | * [[Media:075-1028-00.pdf|RSA3000B 119-7548-XX CPU Card Assembly Replacement Instructions]] (OCR) | ||
* [[Media:37W_23236_6.pdf|RSA3000B Datasheet]] | |||
}} | }} | ||
The '''RSA3303B''' is a portable Real-time Spectrum Analyzer (RSA) meant for lab or production line use with a frequency range of DC to 3 GHz is capable of capturing continuous, intermittent, or random signals. With Digital phosphor spectrum processing (DPX) this RSA provides the user the ability to view time-varying RF signals with color-graded displays based on frequency. For offline spectral analysis, '''.iqt''' and '''.tiq''' waveform data files can be offloaded to [[RSAVu]] Real-Time Spectrum Analyzer Software running on a PC. | |||
The '''RSA3303B''' is a portable Real-time Spectrum Analyzer (RSA) meant for lab or production line use with a frequency range of DC to 3 GHz is capable of capturing continuous, intermittent, or random signals. With Digital phosphor spectrum processing (DPX) this RSA provides the user the ability to view time-varying RF signals with color-graded displays based on frequency. For offline spectral analysis | |||
This RSA is capable of performing spectrum analysis of power, ACPR, C/N, OBW, EBW, and spurious signals. Analog modulation analysis is possible with AM, PM, FM, ASK, and FSK signals. Additionally, this RSA can perform digital modulation analysis from BPSK to 256QAM (with option 21 of the [[RSAVu]] software), time characteristics analysis including pulse measurements, constellation analysis, EVM analysis, AM/AM and AM/PM distortion analysis, RFID analysis, signal source analysis, and CCDF analysis. | This RSA is capable of performing spectrum analysis of power, ACPR, C/N, OBW, EBW, and spurious signals. Analog modulation analysis is possible with AM, PM, FM, ASK, and FSK signals. Additionally, this RSA can perform digital modulation analysis from BPSK to 256QAM (with option 21 of the [[RSAVu]] software), time characteristics analysis including pulse measurements, constellation analysis, EVM analysis, AM/AM and AM/PM distortion analysis, RFID analysis, signal source analysis, and CCDF analysis. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Frequency Range | DC to 3 GHz }}{{Spec | Max Capture BW | 15 MHz }} | {{Spec | Frequency Range | DC to 3 GHz }} | ||
{{Spec | RF Input impedance | 50 Ω }} | {{Spec | Max Capture BW | 15 MHz }} | ||
{{Spec | Maximum Safe RF Input Power | +30 dBm ±0.2 V (RF Band) ±5 V (Baseband) ±5 V (IQ input), RF Attn ≥10 dB }} | {{Spec | RF Input impedance | 50 Ω }} | ||
{{Spec | Input RF/Baseband Attenuator | 0 dB to 50 dB (2 dB step at <3.5 GHz, 10 dB step at ≥3.5 GHz) }} | {{Spec | Maximum Safe RF Input Power | +30 dBm ±0.2 V (RF Band) ±5 V (Baseband) ±5 V (IQ input), RF Attn ≥10 dB }} | ||
{{Spec | Input IQ Input Attenuator | 0 dB to 30 dB (10 dB step) }} | {{Spec | Input RF/Baseband Attenuator | 0 dB to 50 dB (2 dB step at <3.5 GHz, 10 dB step at ≥3.5 GHz) }} | ||
{{Spec | Dynamic Range (Spurious Free) | | {{Spec | Input IQ Input Attenuator | 0 dB to 30 dB (10 dB step) }} | ||
{{Spec | Reference Level Range | | {{Spec | Dynamic Range (Spurious Free) | –70 dBc/15 MHz }} | ||
{{Spec | Reference Level Range | –50 dBm to +30 dBm (1 dB step) (RF); –30 dBm to +20 dBm (5 dB step) (Baseband); –10 dBm to +20 dBm (5 dB step) (IQ Inputs) }} | |||
{{Spec | Resolution Bandwidth per Span (1 Hz to 10 MHz) | Span > 2 GHz: 100 kHz min; to Span 100 Hz: 1 Hz min }} | {{Spec | Resolution Bandwidth per Span (1 Hz to 10 MHz) | Span > 2 GHz: 100 kHz min; to Span 100 Hz: 1 Hz min }} | ||
{{Spec | IQ Inputs (Opt 03) | 20 MHz BW Differential }} | {{Spec | IQ Inputs (Opt 03) | 20 MHz BW Differential }} | ||
{{Spec | Minimum Signal Duration for 100% POI | ≤41 µsec }} | {{Spec | Minimum Signal Duration for 100% POI | ≤41 µsec }} | ||
{{Spec | Trigger Types | Level, Free run, External, and Freq. Mask Trigger (Opt. 02) }} | {{Spec | Trigger Types | Level, Free run, External, and Freq. Mask Trigger (Opt. 02) }} | ||
{{Spec | Ext Trigger Threshold Levels | | {{Spec | Ext Trigger Threshold Levels | –1.5 to +1.5 V settable }} | ||
{{Spec | Displayed Average Noise at 1 GHz (Preamp off) | {{Spec | Displayed Average Noise at 1 GHz | –150 dBm/Hz (Preamp off) }} | ||
{{Spec | Phase Noise at offsets from 1 GHz | {{Spec | Phase Noise at offsets from 1 GHz | 10 kHz: –108 dBc/Hz, 1 MHz: –133 dBc/Hz, 10 MHz: –136 dBc/Hz }} | ||
{{Spec | | {{Spec | Display | 8.4 inch color TFT }} | ||
{{Spec | Storage | 20 GB hard drive and diskette drive (either a 3.5-inch 2HD (1.44 MB) or 2DD (720 KB) }} | |||
{{Spec | Weight (all options) | 20 kg (44 lbs) }} | {{Spec | Weight (all options) | 20 kg (44 lbs) }} | ||
{{Spec | Power & Dissipation (fully loaded) | | {{Spec | Power & Dissipation (fully loaded) | 90–250 V, 47–63 Hz, 350 W max; the principal power switch in at the lower left corner of the rear panel, while the front panel power switch allows ON or STANDBY modes }} | ||
{{Spec | Operating | {{Spec | Operating environment | +10 °C to +40 °C, 20% to 80% rH (no condensation); Altitude ≤3000 m (9842 ft) }} | ||
{{Spec | Connections | | |||
Front panel inputs/outputs are: RF IN [[N connector]] (50Ω, +30 dBm max); PreAmp Pwr [[LEMO S-series connector]] (Preamp power connector) . | |||
Rear panel inputs/outputs: REF OUT/IN [[BNC connector]]s (50Ω); I+/I- INPUT [[BNC connector]]s (50Ω, when using one connector as a single-ended input terminate the other end in 50Ω, Opt. 03 only); Q+/Q- INPUT [[BNC connector]]s (50Ω, when using one connector as a single-ended input terminate the other end in 50Ω, Opt. 03 only); TRIG OUT/IN [[BNC connector]]s (50Ω); [[GPIB connector]] (IEEE 488.2); and US Power Plug (115 V nominal). | |||
Side panel inputs/outputs: LAN [[Ethernet]] connector (10/100BASE-T), [[VGA Connector]], and 2 X [[USB connector]]s (USB 1.1). | |||
}} | |||
{{EndSpecs}} | {{EndSpecs}} | ||
Line 66: | Line 67: | ||
</gallery> | </gallery> | ||
[[Category: Spectrum | [[Category:Spectrum analyzers]] |
Latest revision as of 01:48, 14 October 2022
The RSA3303B is a portable Real-time Spectrum Analyzer (RSA) meant for lab or production line use with a frequency range of DC to 3 GHz is capable of capturing continuous, intermittent, or random signals. With Digital phosphor spectrum processing (DPX) this RSA provides the user the ability to view time-varying RF signals with color-graded displays based on frequency. For offline spectral analysis, .iqt and .tiq waveform data files can be offloaded to RSAVu Real-Time Spectrum Analyzer Software running on a PC.
This RSA is capable of performing spectrum analysis of power, ACPR, C/N, OBW, EBW, and spurious signals. Analog modulation analysis is possible with AM, PM, FM, ASK, and FSK signals. Additionally, this RSA can perform digital modulation analysis from BPSK to 256QAM (with option 21 of the RSAVu software), time characteristics analysis including pulse measurements, constellation analysis, EVM analysis, AM/AM and AM/PM distortion analysis, RFID analysis, signal source analysis, and CCDF analysis.
Key Specifications
Frequency Range | DC to 3 GHz |
---|---|
Max Capture BW | 15 MHz |
RF Input impedance | 50 Ω |
Maximum Safe RF Input Power | +30 dBm ±0.2 V (RF Band) ±5 V (Baseband) ±5 V (IQ input), RF Attn ≥10 dB |
Input RF/Baseband Attenuator | 0 dB to 50 dB (2 dB step at <3.5 GHz, 10 dB step at ≥3.5 GHz) |
Input IQ Input Attenuator | 0 dB to 30 dB (10 dB step) |
Dynamic Range (Spurious Free) | –70 dBc/15 MHz |
Reference Level Range | –50 dBm to +30 dBm (1 dB step) (RF); –30 dBm to +20 dBm (5 dB step) (Baseband); –10 dBm to +20 dBm (5 dB step) (IQ Inputs) |
Resolution Bandwidth per Span (1 Hz to 10 MHz) | Span > 2 GHz: 100 kHz min; to Span 100 Hz: 1 Hz min |
IQ Inputs (Opt 03) | 20 MHz BW Differential |
Minimum Signal Duration for 100% POI | ≤41 µsec |
Trigger Types | Level, Free run, External, and Freq. Mask Trigger (Opt. 02) |
Ext Trigger Threshold Levels | –1.5 to +1.5 V settable |
Displayed Average Noise at 1 GHz | –150 dBm/Hz (Preamp off) |
Phase Noise at offsets from 1 GHz | 10 kHz: –108 dBc/Hz, 1 MHz: –133 dBc/Hz, 10 MHz: –136 dBc/Hz |
Display | 8.4 inch color TFT |
Storage | 20 GB hard drive and diskette drive (either a 3.5-inch 2HD (1.44 MB) or 2DD (720 KB) |
Weight (all options) | 20 kg (44 lbs) |
Power & Dissipation (fully loaded) | 90–250 V, 47–63 Hz, 350 W max; the principal power switch in at the lower left corner of the rear panel, while the front panel power switch allows ON or STANDBY modes |
Operating environment | +10 °C to +40 °C, 20% to 80% rH (no condensation); Altitude ≤3000 m (9842 ft) |
Connections |
Front panel inputs/outputs are: RF IN N connector (50Ω, +30 dBm max); PreAmp Pwr LEMO S-series connector (Preamp power connector) . Rear panel inputs/outputs: REF OUT/IN BNC connectors (50Ω); I+/I- INPUT BNC connectors (50Ω, when using one connector as a single-ended input terminate the other end in 50Ω, Opt. 03 only); Q+/Q- INPUT BNC connectors (50Ω, when using one connector as a single-ended input terminate the other end in 50Ω, Opt. 03 only); TRIG OUT/IN BNC connectors (50Ω); GPIB connector (IEEE 488.2); and US Power Plug (115 V nominal). Side panel inputs/outputs: LAN Ethernet connector (10/100BASE-T), VGA Connector, and 2 X USB connectors (USB 1.1). |
Options (specific to RSA – Not RSAVu software)
- Opt. 02: 65.5 MSample Deep Memory, Frequency Mask Trigger
- Opt. 03: IQ, Differential IQ inputs
- Opt. 28: TD-SCDMA Analysis