1200C01: Difference between revisions
(Created page with "The '''1200C01''' is a RS232 COMM pack for the 1240 and 1241. It gives the logic analyzer the ability to communicate and print using the RS-232 protocol. ==ROM i...") |
m (ROMs to side panel) |
||
| (13 intermediate revisions by 6 users not shown) | |||
| Line 1: | Line 1: | ||
{{Plugin Sidebar | |||
|manufacturer=Tektronix | |||
== | |series=1240 | ||
*[ | |type=1200C01 | ||
|summary=RS-232 Comm Pack (interface) | |||
|image=Tek 1200C01 1.jpg | |||
|caption=Tektronix 1200C01 | |||
|introduced=(?) | |||
|discontinued=(?) | |||
|manuals= | |||
* [[Media:070-6675-02.pdf|Tektronix 1200C01 Installation Instructions]] | |||
* ''070-4343-00 1200C01 COMM Pack Operator’s Manual needed – please add'' [[Category:Manual needed]] | |||
{{ROM Images}} | |||
* [[Media:160-1915-00.bin |1200C01 U126]] | * [[Media:160-1915-00.bin |1200C01 U126]] | ||
* [[Media:160-1915-01.bin |1200C01 U126]] | * [[Media:160-1915-01.bin |1200C01 U126]] | ||
}} | |||
The '''1200C01''' is a [[RS232]] COMM pack for the [[1240]], [[1241]] and [[3001GPX]] logic analyzers. It gives the device the ability to communicate and print through a serial interface. | |||
Connecting to a PC requires a null modem cable, crossing TX/RX (pins 2/3) and DSR (4) to DTR (6). Communication commands are the same as for the GPIB module [[1200C02]] (see section 2-4 in the [[Media:070-4344-00.pdf|1200C02 Instruction Manual]]). Capabilities of the device include remote control of the analyzer, save/load setup, capturing data and transfer of captured data over the serial line. | |||
When combined with a disassembler ROM pack, new menu options are available to use the COMM pack to print/transfer disassembled code via serial output. | |||
==Internals== | |||
The board layout and schematic can be found in the [[1240]] service manual vol 2, fig 10-28, board A31, schematic 41. | |||
==Pictures== | |||
<gallery> | |||
Tek 1200C01 1.jpg | |||
Tek 1200C01 2.jpg | |||
Tek 1200C01 3.jpg | |||
Tek 1200C01 4.jpg | |||
Tek 1200C01 5.jpg | |||
Tek 1200C01 6.jpg | |||
Tek 1200C01 7.jpg | |||
Tek 1200C01 8.jpg | |||
</gallery> | |||
[[Category:ROM packs]] | [[Category:ROM packs]] | ||
Latest revision as of 13:24, 25 August 2023
The 1200C01 is a RS232 COMM pack for the 1240, 1241 and 3001GPX logic analyzers. It gives the device the ability to communicate and print through a serial interface.
Connecting to a PC requires a null modem cable, crossing TX/RX (pins 2/3) and DSR (4) to DTR (6). Communication commands are the same as for the GPIB module 1200C02 (see section 2-4 in the 1200C02 Instruction Manual). Capabilities of the device include remote control of the analyzer, save/load setup, capturing data and transfer of captured data over the serial line.
When combined with a disassembler ROM pack, new menu options are available to use the COMM pack to print/transfer disassembled code via serial output.
Internals
The board layout and schematic can be found in the 1240 service manual vol 2, fig 10-28, board A31, schematic 41.
