CT-1: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(add specs, photos) |
||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 5: | Line 5: | ||
|for=50 Ω scope inputs | |for=50 Ω scope inputs | ||
|image=CT-1_1.jpg | |image=CT-1_1.jpg | ||
|caption=CT-1 | |caption=CT-1 Current Transformer | ||
|introduced=(?) | |introduced=(?) | ||
|discontinued=(?) | |discontinued=(?) | ||
|designers=Murlan Kaufman | |designers=Murlan Kaufman | ||
|manuals= | |manuals= | ||
* [[Media: | * [[Media:070-0375-01.pdf|Tektronix CT-1/P6040 Manual]] | ||
* [ | * [[Media:070-7957-02.pdf|Tektronix CT-1/CT-2 Manual 070-7957-02]] | ||
* [ | * [[Media:070-7957-01.pdf|Tektronix CT-1/CT-2 Manual 070-7957-01]] | ||
* [[Media:Tek_p6040_ct-1_1971_cat.pdf|Description of P6040 and CT-1 in 1971 Catalog]] | |||
}} | }} | ||
The '''Tektronix CT-1 | The '''Tektronix CT-1''' (015-0040-00) Current Transformer is part of the [[P6040|P6040 current probe system]]. | ||
It has a #6-32 threaded stud on the end opposite the output [[SMA]] connector to allow it to be mounted wherever it is needed. | |||
Several CT-1s may be mounted in one assembly under test and monitored, in turn, by a single [[P6040]]. | |||
It was designed by [[Murlan Kaufman]]. | It was designed by [[Murlan Kaufman]]. | ||
==Links== | |||
{{Documents|Link=CT-1}} | |||
{{BeginSpecs}} | |||
{{Spec | Output impedance | 50 Ω }} | |||
{{Spec | Bandwidth | 35 kHz to 1 GHz }} | |||
{{Spec | Risetime | 350 ps }} | |||
{{Spec | Sensitivity | 5 mV/mA into 50 Ω, ±3% }} | |||
{{Spec | Input Aperture | ≥0.065" (1.6 mm) }} | |||
{{Spec | Voltage Isolation | 1000 V }} | |||
{{Spec | Current Rating | 500 mA<sub>RMS</sub>, Max. }} | |||
{{Spec | Insertion Impedance | Terminated: 1 Ω // 5 μH, Un-terminated: 2 Ω // 5 μH }} | |||
{{Spec | Capacitive Loading | 0.6 pF for a bare 20 AWG wire to 1.5 pF for a bare 14 AWG wire }} | |||
{{EndSpecs}} | |||
==Pictures== | ==Pictures== | ||
| Line 24: | Line 42: | ||
Tek ct-1 opt08 sheet1.png | Tek ct-1 opt08 sheet1.png | ||
Tek ct-1 opt08 sheet2.png | Tek ct-1 opt08 sheet2.png | ||
Tek 015-040 1.JPG | Early 015-040 CT-1 | |||
Tek 015-040 2.JPG | Early 015-040 CT-1 | |||
</gallery> | </gallery> | ||
[[Category:Oscilloscope current probes]] | [[Category:Oscilloscope current probes]] | ||
Latest revision as of 20:27, 29 November 2023
The Tektronix CT-1 (015-0040-00) Current Transformer is part of the P6040 current probe system. It has a #6-32 threaded stud on the end opposite the output SMA connector to allow it to be mounted wherever it is needed. Several CT-1s may be mounted in one assembly under test and monitored, in turn, by a single P6040.
It was designed by Murlan Kaufman.
Links
Documents Referencing CT-1
| Document | Class | Title | Authors | Year | Links |
|---|---|---|---|---|---|
| Tekscope 1971 V3 N5 Sep 1971.pdf | Article | The 7D14 Counts Current to Minimize Circuit Loading | Emory Harry | 1971 | 7D14 • P6041 • CT-1 |
Key Specifications
| Output impedance | 50 Ω |
|---|---|
| Bandwidth | 35 kHz to 1 GHz |
| Risetime | 350 ps |
| Sensitivity | 5 mV/mA into 50 Ω, ±3% |
| Input Aperture | ≥0.065" (1.6 mm) |
| Voltage Isolation | 1000 V |
| Current Rating | 500 mARMS, Max. |
| Insertion Impedance | Terminated: 1 Ω // 5 μH, Un-terminated: 2 Ω // 5 μH |
| Capacitive Loading | 0.6 pF for a bare 20 AWG wire to 1.5 pF for a bare 14 AWG wire |
Pictures
-
-
-
-
-
Early 015-040 CT-1
-
Early 015-040 CT-1
