P6463: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
==Specifications== | ==Specifications== | ||
The probe can either be used at 50 MHz with 9 channels or 25 MHz with 16 channels. | The probe can either be used at 50 MHz with 9 channels or 25 MHz with 16 channels. | ||
The P6463 is described in the [[Media:070-5959-09.pdf|DAS 9200 Technician’s Reference]]. | |||
==Photos== | |||
<gallery> | |||
Tek p6463a 1.jpg | |||
Tek p6463a 2.jpg | |||
</gallery> | |||
[[Category:Logic analyzer probes]] | [[Category:Logic analyzer probes]] | ||
[[Category:Manual needed]] | |||
Latest revision as of 08:59, 19 August 2024
The Tektronix P6463 is a 25 MHz to 50 MHz TTL/CMOS pattern generator probe for the DAS9100 logic analyzers. It interfaces to 91S32 and cards.
The P6463 uses the P64xx-family 10-wire input lead harnesses with 0.2" connectors. Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
Specifications
The probe can either be used at 50 MHz with 9 channels or 25 MHz with 16 channels.
The P6463 is described in the DAS 9200 Technician’s Reference.
