P6056: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 13: | Line 13: | ||
The '''Tektronix P6056''' is a 3.5 GHz ×10 probe for 50 Ω-input scopes, released along with the [[7A19]] amplifier in 1972. | The '''Tektronix P6056''' is a 3.5 GHz ×10 probe for 50 Ω-input scopes, released along with the [[7A19]] amplifier in 1972. | ||
It has an Identify switch and readout | It has an Identify switch and [[readout encoding pin]]. | ||
Its sister model [[P6057]] has ×100 attenuation. | Its sister model [[P6057]] has ×100 attenuation. | ||
| Line 28: | Line 28: | ||
<blockquote> | <blockquote> | ||
<u>WARNING</u>: | |||
This high performance device has a fragile resistor assembly in the probe head, subject to failure in rough usage. | This high performance device has a fragile resistor assembly in the probe head, subject to failure in rough usage.<br /> | ||
Use with slip-on tip whenever possible. One replacement part is provided with the package.<br /> | |||
Use with slip-on tip whenever possible. One replacement part is provided with the package. | Contact nearest Field Office for additional parts (P/N 307-0330-00), if required.<br /> | ||
For replacement and Calibration Procedure, refer to Pg. 3 & 4 of manual.<br /> | |||
Contact nearest Field Office for additional parts (P/N 307-0330-00), if required. | |||
For replacement and Calibration Procedure, refer to Pg. 3 & 4 of manual. | |||
</blockquote> | </blockquote> | ||
Latest revision as of 08:51, 25 March 2024
The Tektronix P6056 is a 3.5 GHz ×10 probe for 50 Ω-input scopes, released along with the 7A19 amplifier in 1972.
It has an Identify switch and readout encoding pin.
Its sister model P6057 has ×100 attenuation.
Key Specifications
| Bandwidth | DC to 3.5 GHz |
|---|---|
| Rise time | 100 ps |
| Attenuation | 10× |
| Input impedance | 500 Ω // approx. 1 pF |
| Scope input impedance | 50 Ω |
| Maximum input Voltage | 16 V DC or RMS |
| Features | Readout Pin, ID Button |
WARNING:
This high performance device has a fragile resistor assembly in the probe head, subject to failure in rough usage.
Use with slip-on tip whenever possible. One replacement part is provided with the package.
Contact nearest Field Office for additional parts (P/N 307-0330-00), if required.
For replacement and Calibration Procedure, refer to Pg. 3 & 4 of manual.