PM403: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Add ROM image link)
No edit summary
 
(8 intermediate revisions by 2 users not shown)
Line 9: Line 9:
|discontinued=(?)
|discontinued=(?)
|manuals=
|manuals=
* ''please add'' [[Category:Manual needed]]
* [[Media:070-6594-01.pdf|Tektronix PM403 Manual]]
{{ROM Images}}
}}
}}
The '''PM 403''' personality module is a disassembly probe for the [[MOS Technology 6502]] microprocessor.  
The '''PM403''' personality module is a disassembly probe for the [[MOS Technology 6502]] microprocessor.  
It can be used with the [[1230]], [[1225]] and [[1220]] logic analyzers.  
It can be used with the [[1230]], [[1225]] and [[1220]] logic analyzers.


Note from operators manual:
The '''PM403''' can be converted to a [[PM407]] for use with the Motorola 6800/6802 microprocessors with a change of two jumpers and the EPROM.
<blockquote>
''DISASSEMBLY DISPLAY''


''Microprocessor disassembly is  an option for the analyzer. When you power up with an optional microprocessor probe connected, the analyzer asks if you want to  use the setup for the microprocessor probe. If you want to use the micropro-cessor probe's setup, press ENTER to load it.  Otherwise, press MENU to preserve the current analyzer setup and access the normal analyzer menus. Disassembly information is discussed in  the operator's manual for each microprocessor disassembly probe. ''
{{MissingSpecs}}
</blockquote>


==ROM images==
==Pictures==
* [[Media:160-4861-01.bin |PM403 U12]]


==See also==
Note that the ribbon cables are connected to the board via transition connectors (i.e. not an IDC socket mated with header pins) and thus could not be removed for these photos without desoldering/disassembly. This was done to keep the PCB assembly's profile low so it would fit into the PacTec case.
* [[ROM images | All Tektronix ROM images]]
   
{{MissingSpecs}}
{{MissingPics}}


<gallery>
PM403(1).jpg
PM403(2).jpg
PM403(3).jpg
PM403(4).jpg
</gallery>




[[Category:Logic analyzer personality modules]]
[[Category:Logic analyzer personality modules]]

Latest revision as of 02:44, 27 September 2024

Tektronix PM403
Disassembly Probe for 6502
Image needed

Compatible with 1220 1225 1230

Produced from (?) to (?)

Manuals
ROM Images
File Pos. Checksum
160-4861-01 U12 83dd758a
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The PM403 personality module is a disassembly probe for the MOS Technology 6502 microprocessor. It can be used with the 1230, 1225 and 1220 logic analyzers.

The PM403 can be converted to a PM407 for use with the Motorola 6800/6802 microprocessors with a change of two jumpers and the EPROM.

Key Specifications

  • please add

Pictures

Note that the ribbon cables are connected to the board via transition connectors (i.e. not an IDC socket mated with header pins) and thus could not be removed for these photos without desoldering/disassembly. This was done to keep the PCB assembly's profile low so it would fit into the PacTec case.

Retrieved from "https://w140.com/tekwiki/index.php?title=PM403&oldid=97501"