2753: Difference between revisions
Jump to navigation
Jump to search
m (Photos from Daniel Pitton) |
No edit summary |
||
Line 10: | Line 10: | ||
|manuals= | |manuals= | ||
* Operator, Service, and Programmer Manuals needed [[Category:Manual needed]] | * Operator, Service, and Programmer Manuals needed [[Category:Manual needed]] | ||
* [[Media: Tek_2753_Catalog_Spec_1988.pdf| Tektronix 2754 | * [[Media: Tek_2753_Catalog_Spec_1988.pdf| Tektronix 2754 introduction spec]] (OCR) | ||
* [[Media: Tek_2753_Catalog_Spec_1991.pdf| Tektronix 2754 | * [[Media: Tek_2753_Catalog_Spec_1991.pdf| Tektronix 2754 final spec]] (OCR) | ||
}} | }} | ||
The '''Tektronix 2753P''' is a spectrum analyzer with a frequency range of 100 Hz to 1.8 GHz. The '''P''' suffix designation indicates GPIB '''P'''rogrammability. The minimum resolution bandwidth is 10 Hz, and provides measurement resolution proportional to the frequency accuracy or span. In addition to conventional digital storage features, non-volatile memory (NVRAM) stores up to 9 separate waveforms with their readouts and markers, for later recall for additional analysis and comparison, and 10 control settings. Also, store up to 39 preselector peaks and 12 external band peaks. The instrument can selectively count one particular signal out of several that may be present at its input. | The '''Tektronix 2753P''' is a spectrum analyzer with a frequency range of 100 Hz to 1.8 GHz. The '''P''' suffix designation indicates GPIB '''P'''rogrammability. The minimum resolution bandwidth is 10 Hz, and provides measurement resolution proportional to the frequency accuracy or span. In addition to conventional digital storage features, non-volatile memory (NVRAM) stores up to 9 separate waveforms with their readouts and markers, for later recall for additional analysis and comparison, and 10 control settings. Also, store up to 39 preselector peaks and 12 external band peaks. The instrument can selectively count one particular signal out of several that may be present at its input. | ||
Line 28: | Line 28: | ||
{{Spec | Resolution Bandwidth | 10 Hz to 3 MHz in decade steps (-6 dB bandwidth) }} | {{Spec | Resolution Bandwidth | 10 Hz to 3 MHz in decade steps (-6 dB bandwidth) }} | ||
{{Spec | RF Input impedance | 50 Ω }} | {{Spec | RF Input impedance | 50 Ω }} | ||
{{Spec | Maximum Safe Input Power | | {{Spec | Maximum Safe Input Power | 1 Watt (+30 dBm) CW, 75 W peak (1 µs pulse, 0.1% duty factor) }} | ||
{{Spec | RF Attenuator | 0 dB to 60 dB, 10 dB steps }} | {{Spec | RF Attenuator | 0 dB to 60 dB, 10 dB steps }} | ||
{{Spec | Reference Level | | {{Spec | Reference Level | –117 dBm to +40 dBm (+30 dBm maximum safe input) }} | ||
{{Spec | LO Output Power (2 to 6 GHz) | 1st LO: +7.5 dBm to +15 dBm; 2nd LO: -22 dBm to +15 dBm; Must be terminated into 50 Ω when they are not connector to an external device }} | {{Spec | LO Output Power (2 to 6 GHz) | 1st LO: +7.5 dBm to +15 dBm; 2nd LO: -22 dBm to +15 dBm; Must be terminated into 50 Ω when they are not connector to an external device }} | ||
{{Spec | Sweep Speed | 5 s to 2 µs in | {{Spec | Sweep Speed | 5 s to 2 µs in 1–2–5 sequence (10 s/div in auto) }} | ||
{{Spec | Video Bandwidth | 0.3 Hz to 30 kHz }} | {{Spec | Video Bandwidth | 0.3 Hz to 30 kHz }} | ||
{{Spec | Displayed Average Noise | −130 dBm }} | {{Spec | Displayed Average Noise | −130 dBm }} | ||
{{Spec | Display Dynamic Range | 90 dB }} | {{Spec | Display Dynamic Range | 90 dB }} | ||
{{Spec | Dynamic Range (Compression to noise) | 134 dBm }} | {{Spec | Dynamic Range (Compression to noise) | 134 dBm }} | ||
{{Spec | Calibrator | {{Spec | Calibrator output | 50 Ω, -20 dBm ±0.3 dB at 100 MHz }} | ||
{{Spec | Weight | 27 kg (60 lbs) }} | {{Spec | Weight | 27 kg (60 lbs) }} | ||
{{Spec | Power | 90 − 132 V<sub>AC</sub>, 48 to 448 Hz; 180 – 250 V<sub>AC</sub>, 48 to 72 Hz. At 115 V<sub>AC</sub>, 60 Hz, 210 W max with all options }} | {{Spec | Power | 90 − 132 V<sub>AC</sub>, 48 to 448 Hz; 180 – 250 V<sub>AC</sub>, 48 to 72 Hz. At 115 V<sub>AC</sub>, 60 Hz, 210 W max with all options }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
==Options== | ==Options== | ||
* Opt. 01: Add preselector for the 1.7 to 21 GHz band and limiter for 1st mixer below 1.8 GHz | * Opt. 01: Add preselector for the 1.7 to 21 GHz band and limiter for 1st mixer below 1.8 GHz | ||
* Opt. 07: | * Opt. 07: 75 Ω dBmV input and calibration in addition to 50 Ω dBm input and calibration | ||
* Opt. 23: GRASP software, National’s PC2A (GPIB) card, and GPIB cable) | * Opt. 23: GRASP software, National’s PC2A (GPIB) card, and GPIB cable) | ||
* Opt. 27: Epson LT-386SX, GRASP software, National’s PC2A (GPIB) card, and GPIB cable | * Opt. 27: Epson LT-386SX, GRASP software, National’s PC2A (GPIB) card, and GPIB cable |