7S11: Difference between revisions
No edit summary |
(headline) |
||
| Line 21: | Line 21: | ||
contact strips on the right side of the plug-in. The control signals are routed to a similar | contact strips on the right side of the plug-in. The control signals are routed to a similar | ||
strip on the left of the module for another 7S11 in a dual-channel or X-Y configuration. | strip on the left of the module for another 7S11 in a dual-channel or X-Y configuration. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
Revision as of 05:58, 24 October 2014
The Tektronix 7S11 is a sampling plug-in for 7000-series scopes.
It takes one S-series sampling head, e.g. S-4 or S-6, to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.
For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through contact strips on the right side of the plug-in. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel or X-Y configuration.
Key Specifications
| Deflection factor | 2 to 200 in 1-2-5 sequence, unit as labelled on the sampling head (usually mV, except for the optical-input S-42 scaled in mW) |
|---|---|
| DC Offset range | +/- 1 V |
| Offset output | 10 × offset voltage, source impedance 10 kΩ |
| Vertical signal output | 200 mV/Div, max. 2.4 Vp-p, source impedance 10 kΩ |
| Delay range | at least 10 ns |
| Weight | 0.9 kg (3.25 lbs) |
Internals
The 7S11 does not contain integrated circuits (except dual transistors).
Links
Pictures
-
7S11 with inserted S-4 head
-
7S11 with empty plugin bay
-
7S11 with inserted S-6 sampling head
-
spring-loaded contact block (right)
-
right side, cover removed
-
left side, cover removed
-
right side
-
left side
