11A71: Difference between revisions

Revision as of 19:29, 11 June 2017

Template:Plugin Sidebar 2 The Tektronix 11A71 a single-channel 1 GHz amplifier for 11000-series scopes.

The 11A71 is derived from the 7A29.

Bandwidth	1 GHz
Input impedance	50 Ω via a Tekprobe BNC connector on the front on the plug-in

please add

11A71 external view
Block diagram
Right side of the 11A71 plug-in (analog board)
Input section. Cable loop acts as a delay line, connects to the input attenuator.
Input attenuator, 50 Ω signal path. Laser-trimmed thick film resistors. AC coupling capacitor in plastic support.
Amplifier section. Blue cable from input attenuator connects to the 155-0180-00 input protection circuit. Signal is differential from after the first amplifier up to the AD converter in the mainframe.
Compensation trimmers
Close-up of late-80s RF design
Digital board, 8031 MCU
Digital daughter board
left side
right side
Attenuator
Kernel
Amplifier
Interface

@@ Line 40: / Line 40: @@
 Tek 11a71 left.jpg  | left side
 Tek 11a71 right.jpg | right side
+Tektronix_11A71_Schematic_1_Attenuator.jpg|Attenuator
+Tektronix_11A71_Schematic_2_Kernel.jpg|Kernel
+Tektronix_11A71_Schematic_3_Amplifier.jpg|Amplifier
+Tektronix_11A71_Schematic_4_Interface.jpg|Interface
 </gallery>