500 Series plug-in interface: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
(integrated info from duplicate page)
Line 17: Line 17:
|  3 || bgcolor="Yellow"    | −Signal            ||  100 mV/cm, bias +67.5 V ±2%
|  3 || bgcolor="Yellow"    | −Signal            ||  100 mV/cm, bias +67.5 V ±2%
|-  
|-  
|  4 || bgcolor="Yellow"    | Int Trig GND      ||  [[544]], [[546]], [[547]], [[555]] only
|  4 || bgcolor="Yellow"    | Int Trig GND      ||  [[544]], [[546]], [[547]], [[549]], [[556]], late [[555]] only
|-  
|-  
|  5 || bgcolor="Yellow"    | Int Trig in        ||  [[544]], [[546]], [[547]], [[555]] only
|  5 || bgcolor="Yellow"    | Int Trig +        ||  [[544]], [[546]], [[547]], [[549]], [[556]], late [[555]] only
|-  
|-  
|  6 ||                     | n/c               ||   
|  6 || Sawtooth            | [[556]] only, others n/c     ||   
|-  
|-  
|  7 || bgcolor="LightGreen" | Slave Pulse out    ||  [[547]] only
|  7 || bgcolor="LightGreen" | Slave Pulse out    ||  [[547]] only
Line 57: Line 57:
|}
|}


[[File:040-0065-00 p4.jpg|thumb|400px]]
<gallery>
 
Pluginpinout556.png                | pinout shown in 556 schematic
040-0065-00 p4.jpg                | pinout listed in 040-0065-00 kit docs
Tek letter-series pinout.png      | pinout shown in 1A2 schematic
500-series connector male front.jpg| Male pins on plugin
500-series connector male rear.jpg | Rear lugs on plugin
</gallery>




[[Category:Plug-in interfaces]]
[[Category:Plug-in interfaces]]

Revision as of 10:11, 25 June 2018

click to enlarge

The plug-in interface of the 500-series scopes is a single 16-pin Amphenol connector.

Pin-out

Pin Function Comment
1 +Signal 100 mV/cm, bias +67.5 V ±2%
2 Ground
3 −Signal 100 mV/cm, bias +67.5 V ±2%
4 Int Trig GND 544, 546, 547, 549, 556, late 555 only
5 Int Trig + 544, 546, 547, 549, 556, late 555 only
6 556 only, others n/c
7 Slave Pulse out 547 only
8 Multi-trace sync Cathode; grounded by CA, M etc. in Alt Trace mode
9 −150 V min. 3.8 mA, max. 60 mA
10 +100 V min. 4.5 mA, max. 50 mA
11 +225 V min. 16 mA, max. 75 mA
12 +350 V min. 0 mA, max. 20 mA
13  6.3 VAC plug-in AC heater supply, max. 2.8 A
14  6.3 VAC return for pin 13
15 +75 V min./max. 150 mA for DC series heaters and LV supply 
16 Multi-trace sync Anode

Pin group function legend

 DC power 
 AC and heater power 
 Deflection and Trigger Signals  
 Control Signals 
  • pinout shown in 556 schematic

    pinout shown in 556 schematic

  • pinout listed in 040-0065-00 kit docs

    pinout listed in 040-0065-00 kit docs

  • pinout shown in 1A2 schematic

    pinout shown in 1A2 schematic

  • Male pins on plugin

    Male pins on plugin

  • Rear lugs on plugin

    Rear lugs on plugin

Retrieved from "https://w140.com/tekwiki/index.php?title=500_Series_plug-in_interface&oldid=34159"