A6303: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
{{Spec | Input range | 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous) | {{Spec | Input range | 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous) | ||
Derating: 200 A<sub>p-p</sub> up to 20 kHz, down to 20 A<sub>p-p</sub> at 20 MHz (see curve)}} | Derating: 200 A<sub>p-p</sub> up to 20 kHz, down to 20 A<sub>p-p</sub> at 20 MHz (see curve)}} | ||
{{Spec | Sensitivity | 10 mA/Div to 50 A/Div, 1−2−5 (with [[AM503]]) }} | |||
{{Spec | Noise | ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)}} | {{Spec | Noise | ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)}} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
Revision as of 08:35, 23 March 2020
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe. It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Key Specifications
| Bandwidth | DC − 15 MHz |
|---|---|
| Rise time | ≤23 ns |
| Input range | 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)
Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve) |
| Sensitivity | 10 mA/Div to 50 A/Div, 1−2−5 (with AM503) |
| Noise | ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC) |
Manuals
Links
- 120-1102-00 Current Transformer
- http://www.tek.com/datasheet/current-measurement-system-probes
- Tek A6303 @ barrytech.com
Pictures
-
P6303 probe
-
Open jaws
-
-
A6303 maximum current vs frequency
-
A6303 insertion impedance vs frequency
