P6045: Difference between revisions

Revision as of 13:20, 23 May 2021

The Tektronix P6045 is a 230 MHz FET probe. It requires a ±12.5 V supply from a 015-0073-00 or a 454/454A scope.

Attenuator heads can be placed on the tip of the P6045, reducing the capacitance, increasing the signal amplitude range, and of course reducing the sensitivity.

Key Specifications

please add

The signal amplitude range is 500 mV.

The offset can be set to any voltage from −1 V to to 1 V.

Manuals

Tektronix P6045 Manual (PDF)

Links

P6045 @ barrytech.com

Pictures

schematic diagram
power connector

@@ Line 1: / Line 1: @@
 [[File:p6045 box.jpg|thumb|right|350px]]
-The '''Tektronix P6045''' is a 230 MHz FET probe.
+The '''Tektronix P6045''' is a 230 MHz FET probe.  It requires a ±12.5 V supply from a [[015-0073-00]] or a [[454]]/[[454A]] scope.
+Attenuator heads can be placed on the tip of the P6045, reducing the capacitance, increasing the signal amplitude range, and of course reducing the sensitivity.
+{{MissingSpecs}}
 The signal amplitude range is 500 mV.
-The offset can be set to any voltage from -1 V to to 1 V.  Attenuator heads can be
+The offset can be set to any voltage from −1 V to to 1 V.
-placed on the tip of the P6045, reducing the capacitance, increasing the signal
-amplitude range, and of course reducing the sensitivity.
-The P6045 requires a ±12.5 V supply from a [[015-0073-00]] or a [[454]]/[[454A]] scope.
 ==Manuals==
-* [http://w140.com/TekP6045.pdf Tektronix P6045 Manual (PDF)]
+* [[Media:070-0597-00.pdf|Tektronix P6045 Manual (PDF)]]
 ==Links==