1A5: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 17: | Line 17: | ||
}} | }} | ||
The '''Tektronix Type 1A5''' is a differential amplifier plug-in for [[500-series scopes]]. | The '''Tektronix Type 1A5''' is a differential amplifier plug-in for [[500-series scopes]]. | ||
It was designed by [[Bill DeVey]] after consultation with [[John Kobbe]]. | |||
It has an [[Amphenol 165 series connector]] on the front panel for direct connection of the Type [[P6046|P6046 Active Differential Probe]]. | It has an [[Amphenol 165 series connector]] on the front panel for direct connection of the Type [[P6046|P6046 Active Differential Probe]]. |
Revision as of 19:20, 10 January 2023
The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes. It was designed by Bill DeVey after consultation with John Kobbe.
It has an Amphenol 165 series connector on the front panel for direct connection of the Type P6046 Active Differential Probe.
Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the 500-series scope line.
Key Specifications
Bandwidth | 50 MHz down to 5 mV/div, 40 MHz at 1 mV/div |
---|---|
Deflection | 1 mV/div to 20 V/div, 1−2−5 |
Common-mode rejection | 20,000:1 DC to 100kHz, 10,000:1 up to 1MHz, 200:1 at 20 MHz |
Like most Tektronix differential plug-ins, the 1A5 has three modes: VA−VC, VA−VB, and VC−VB.
VC is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).