442: Difference between revisions
Jump to navigation
Jump to search
m (→top: clean up, replaced: {{Oscilloscope Sidebar → {{Oscilloscope Sidebar |manufacturer=Tektronix |designers=, title=Tektronix → model=) |
No edit summary |
||
| Line 7: | Line 7: | ||
discontinued=(?) | | discontinued=(?) | | ||
manuals= | manuals= | ||
* [[Media:070-2373-00.pdf|Tektronix 442 Operators Manual (PDF, OCR, bad-OCR)]] | * [[Media:070-2373-00.pdf|Tektronix 442 Operators Manual (PDF, OCR, bad-OCR)]] | ||
* [[Media:070-2374-01.pdf|Tektronix 442 Service Manual (PDF, OCR, bad-OCR)]] | * [[Media:070-2374-01.pdf|Tektronix 442 Service Manual (PDF, OCR, bad-OCR)]] | ||
}} | }} | ||
The '''Tektronix 442''' is a 35 MHz dual-trace oscilloscope with a single timebase. | The '''Tektronix 442''' is a 35 MHz dual-trace oscilloscope with a single timebase. | ||
Revision as of 03:04, 10 August 2021
The Tektronix 442 is a 35 MHz dual-trace oscilloscope with a single timebase.
Specifications
please add
The anode voltage on the CRT is 10 kV and the standard phosphor was P31.
A Tektronix 442 consumes 36 watts and weighs about 20 pounds.
Internals
Serials numbers from B010100 to B010786 use the 154-0729-00 CRT. Starting with serial number B010787, the 154-0804-00 CRT is used.
Triggering is done using a trigger amplifier made of discrete bipolar transistors and a 74S00 TTL quad NAND gate configured as a flip-flop.
The power supply is linear and regulated using op amps as error amplifiers.
The vertical and horizontal amplifiers are made of discrete bipolar transistors except for the dual-JFETs that are used as high-impedance buffers at the signal inputs.
