P410: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 11: | Line 11: | ||
* ''please add'' | * ''please add'' | ||
}} | }} | ||
The '''Tektronix P410''' is a 10× passive voltage probe. Maximum voltage is 600 V peak-to-peak. It connects to the scope with a [[UHF connector]]. | The '''Tektronix P410''' is a 10× passive voltage probe. Maximum voltage is 600 V peak-to-peak. | ||
It connects to the scope with a [[UHF connector]]. | |||
The "P400 Series" (not to be confused with the modern [[P400]] probe) also includes P405 (5x), P420 (20x), P450 (50x), P450-L (50x extra low capacitance), and P4100 (100x). | The "P400 Series" (not to be confused with the modern [[P400]] probe) also includes | ||
P405 (5x), P420 (20x), P450 (50x), P450-L (50x extra low capacitance), and P4100 (100x). | |||
These probes were [[introduced in 1955]] along with the [[541|Type 541]] and [[545|Type 545]] scopes because at 30 MHz, the [[P510|P510A]]'s 50 Ω coax cable exhibited unacceptable ringing due to the impedance mismatch at the scope's 1 MΩ input. | These probes were [[introduced in 1955]] along with the [[541|Type 541]] and [[545|Type 545]] scopes because at 30 MHz, | ||
the [[P510|P510A]]'s 50 Ω coax cable exhibited unacceptable ringing due to the impedance mismatch at the scope's 1 MΩ input. | |||
The P400 uses a special cable with a very thin, high-resistance center conductor which creates a better impedance match. All subsequent high-impedance probes use this kind of cable. | The P400 uses a special cable with a very thin, high-resistance center conductor which creates a better impedance match. | ||
All subsequent high-impedance probes use this kind of cable. | |||
==Links== | ==Links== | ||
* [ | * [https://www.freepatentsonline.com/2883619.html US Patent 2883619, ''Electrical Probe'']. [[John Kobbe]] and [[Bill Polits]]. Filed February 1956. ([https://patentimages.storage.googleapis.com/pdfs/US2883619.pdf PDF]) | ||
{{MissingPics}} | {{MissingPics}} |
Revision as of 14:10, 7 February 2023
The Tektronix P410 is a 10× passive voltage probe. Maximum voltage is 600 V peak-to-peak. It connects to the scope with a UHF connector.
The "P400 Series" (not to be confused with the modern P400 probe) also includes P405 (5x), P420 (20x), P450 (50x), P450-L (50x extra low capacitance), and P4100 (100x).
These probes were introduced in 1955 along with the Type 541 and Type 545 scopes because at 30 MHz, the P510A's 50 Ω coax cable exhibited unacceptable ringing due to the impedance mismatch at the scope's 1 MΩ input.
The P400 uses a special cable with a very thin, high-resistance center conductor which creates a better impedance match. All subsequent high-impedance probes use this kind of cable.
Links
- US Patent 2883619, Electrical Probe. John Kobbe and Bill Polits. Filed February 1956. (PDF)
Pictures
- please add