TDS754: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 64: Line 64:
{{Spec | Bandwidth  | 500 MHz at 10 mv/div and above; 750 MHz @ 5 mV/div; 600 MHz @ 2 mV/div; 500 MHz @ 1 mV/div }}
{{Spec | Bandwidth  | 500 MHz at 10 mv/div and above; 750 MHz @ 5 mV/div; 600 MHz @ 2 mV/div; 500 MHz @ 1 mV/div }}
{{Spec | Sample rate | 1 or 2 channels @ 2 GS/s, 3 or 4 channels @ 1 GS/s }}
{{Spec | Sample rate | 1 or 2 channels @ 2 GS/s, 3 or 4 channels @ 1 GS/s }}
{{Spec | Number of Channels | 4 }}
{{Spec | Channels   | 4 }}
{{Spec | Vertical Sensitivity| 1 mV to 10 V/div with calibrated fine adjustment }}
{{Spec | Vertical Sensitivity| 1 mV to 10 V/div with calibrated fine adjustment }}
{{Spec | Resolution  | 8 bit }}
{{Spec | Resolution  | 8 bit }}
{{Spec | Time Base Range| 500 ps to 10 s/div }}
{{Spec | Time Base | 500 ps to 10 s/div }}
{{Spec | Record length |
{{Spec | Record length |
* Base model – 50k samples per channel  
* Base model – 50k samples per channel  
* 1M Option  – 500 K points on 1 channel;  250 k points on 2 channels ; 130 k points on 3 or 4 channels  
* 1M Option  – 500 K points on 1 channel;  250 k points on 2 channels ; 130 k points on 3 or 4 channels  
* 2M Option  – 8 M points on 1 channel;  4 M points on 2 channels ; 2 M points on 3 or 4 channels }}
* 2M Option  – 8 M points on 1 channel;  4 M points on 2 channels ; 2 M points on 3 or 4 channels }}
{{Spec | Acquisition modes | sample, envelope, average, high-resolution, peak-detect }}
{{Spec | Acquisition modes | sample, envelope, average, high-resolution, peak-detect }}
{{Spec | Display  | Color; Zoom }}
{{Spec | Display  | Color; Zoom }}
{{Spec | Trigger modes | Edge, logic, pulse; Video trigger with option 05 ([[NTSC]], [[SECAM]], [[PAL]], HDTV, and FlexFormat) }}
{{Spec | Trigger modes | Edge, logic, pulse; Video trigger with option 05 ([[NTSC]], [[SECAM]], [[PAL]], HDTV, and FlexFormat) }}

Revision as of 00:44, 20 October 2022

Tektronix TDS754
500 MHz, 2 GS/s 4-channel digital scope

Produced from (?) to (?)

Manuals

TDS754A

TDS754C

TDS754D

Common

(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix TDS754 is a 500 MHz, 2 GS/s four-channel digital storage scope with a color screen.

Key Specifications

Bandwidth 500 MHz at 10 mv/div and above; 750 MHz @ 5 mV/div; 600 MHz @ 2 mV/div; 500 MHz @ 1 mV/div
Sample rate 1 or 2 channels @ 2 GS/s, 3 or 4 channels @ 1 GS/s
Channels 4
Vertical Sensitivity 1 mV to 10 V/div with calibrated fine adjustment
Resolution 8 bit
Time Base 500 ps to 10 s/div
Record length
  • Base model – 50k samples per channel
  • 1M Option – 500 K points on 1 channel; 250 k points on 2 channels ; 130 k points on 3 or 4 channels
  • 2M Option – 8 M points on 1 channel; 4 M points on 2 channels ; 2 M points on 3 or 4 channels
Acquisition modes sample, envelope, average, high-resolution, peak-detect
Display Color; Zoom
Trigger modes Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive
I/O Full GPIB programmability
Hardcopy Using GPIB, RS-232, or Centronics ports

Software


Firmware

Links

See the Repairs page regarding HDD/FDD replacements.

Internals

The TDS754C&D and TDS784C&D series are nearly identical, differences being front-panel cosmetics and the presence (754) or absence (784) of a few capacitors on the acquisition board. The only other difference is the position of instrument ID jumpers, also on the acquisition board. In fact, it is entirely possible to convert a 754 to a 784 (see above Links and the TDS784 page for more information).

Note that in the TDS700D series, the acquisition board variant is important — the CPU Board with Firmware 7.xx cannot be used together with the old acquisition board, and the CPU board with old Firmware 6.xx doesn't run with the new acquisition board. The fact that the CPU board has part number 671-4349-00 is by itself not a reliable indication of a compatible firmware version.

Pictures

TDS754A

  • TDS754A front

    TDS754A front

  • TDS754A rear

    TDS754A rear

TDS754C

  • TDS754C front

    TDS754C front

TDS754D

  • TDS754D runs into DPO-mode

    TDS754D runs into DPO-mode

  • TDS754D Acquisition board, early model (SN B040000 below)

    TDS754D Acquisition board, early model (SN B040000 below)

  • TDS754D Acquisition board, later model (SN B040000 upper), 2M option ready

    TDS754D Acquisition board, later model (SN B040000 upper), 2M option ready

Common

  • Option 05 Internal Parts

    Option 05 Internal Parts

  • Option HD Internal Parts, 2.5" Disk Version

    Option HD Internal Parts, 2.5" Disk Version

  • Option HD Internal Parts, PCMCIA Disk Version

    Option HD Internal Parts, PCMCIA Disk Version

Assembly part numbers

Assy Description TDS754A P/N TDS754C P/N TDS754D P/N
A10 Acquisition board 671-1476-05 671-4039–01 679-4165-0x/679-4771-01
A10 Acquisition board (1M Opt.) - 671-4041–00 679-4166-0x/679-4771-01
A10 Acquisition board (2M Opt.) - - 679-4771-01
A11 DRAM/CPU/Display board (inlc. 1M Opt.) - 671-4003–00 / 671-4172–00 671-4172–00 / 671-4349-00
A11 DRAM/CPU/Display board (only 2M Opt.) - - -
A12 Front panel assembly - 614-0937–02 614-0953–00
A14 D1 Bus - 671-2847-00 671-2847-00
A14 D1 Bus (Opt. 05) - 671-2848-00 671-2848-00
A15 Attenuator assembly - - -
A16 Power supply unit - 620–0063–04 620-0063-05
A20 CRT Display assembly - 640–0077–04 640–0077–11
A23 RS232/Centronics assembly 640-2437-00 640-2437-00 640-2437-00
Retrieved from "https://w140.com/tekwiki/index.php?title=TDS754&oldid=78350"