GR-874 connector: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
Most GR-874 connectors came in 50 Ω impedance.  Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing, but different (thinner) center pin geometry. The Tektronix [[519]] uses the 125 Ω GR-874 variant.  
Most GR-874 connectors came in 50 Ω impedance.  Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing, but different (thinner) center pin geometry. The Tektronix [[519]] uses the 125 Ω GR-874 variant.  


The regular 50 Ω version is used in the [[1S1]], [[1S2]], [[3S1]], [[3S7]], [[3T7]], [[4S1]], [[4S2]], [[5T1]], [[5T1A]], [[5T3]], [[7M11]], [[N]], [[S-1]], [[S-2]], [[106]], [[109]], [[110]], [[113]], [[191]], [[280]], [[281]], [[282]], [[P6051]], [[017-0086-00]], [[017-0088-00]], [[035-5031-00]], [[067-506]], [[067-0511-00]], [[067-0594-00]], [[067-0832-01]], and possibly others.
The regular 50 Ω version is used in the [[1S1]], [[1S2]], [[3S1]], [[3S7]], [[3T7]], [[4S1]], [[4S2]], [[5T1]], [[5T1A]], [[5T3]], [[7M11]], [[N]], [[S-1]], [[S-2]], [[106]], [[109]], [[110]], [[113]], [[191]], [[261]], [[280]], [[281]], [[282]], [[R293]], [[661]], [[P6025]], [[P6032]], [[P6051]], [[017-0086-00]], [[017-0088-00]], [[035-5031-00]], [[067-506]], [[067-0511-00]], [[067-0513-00]], [[067-0578-99]], [[067-0594-00]], [[067-0832-01]], and possibly others.


Different versions of the connector have different maximum voltage ratings;
Different versions of the connector have different maximum voltage ratings;

Revision as of 04:25, 8 July 2023

General Radio 874 (GR-874) connectors are hermaphroditic (asexual) coaxial RF connectors developed by Eduard Karplus at General Radio in the late 1940s, initially for applications up to "4500 Mc" (4.5 GHz).

GR-874 connectors are carefully engineered to keep a constant impedance throughout the signal path, by varying connector diameters between free-air and dielectrically supported sections. These connectors therefore exhibit very little reflection and are well suited for frequencies up to 9 GHz and pulse applications. For higher frequencies a smaller connector is required to avoid the excitation of wave guide modes.

Most GR-874 connectors came in 50 Ω impedance. Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing, but different (thinner) center pin geometry. The Tektronix 519 uses the 125 Ω GR-874 variant.

The regular 50 Ω version is used in the 1S1, 1S2, 3S1, 3S7, 3T7, 4S1, 4S2, 5T1, 5T1A, 5T3, 7M11, N, S-1, S-2, 106, 109, 110, 113, 191, 261, 280, 281, 282, R293, 661, P6025, P6032, P6051, 017-0086-00, 017-0088-00, 035-5031-00, 067-506, 067-0511-00, 067-0513-00, 067-0578-99, 067-0594-00, 067-0832-01, and possibly others.

Different versions of the connector have different maximum voltage ratings; 1000 V is typical. There are locking and non-locking versions.

By the 1970s, GR-874 connectors were being supplanted by SMA connectors in test equipment, see e.g. the progression from the S-1 to the S-4 sampling heads, also motivated by the higher bandwidth requirements.

GR-874 connectors and adapters continue to be available through IET Labs, Max-Gain Systems, Pasternack and possibly others.

Links

Pictures