DM501: Difference between revisions
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
(See [[DM501A]] for the significantly different successor model.) | (See [[DM501A]] for the significantly different successor model.) | ||
It also has a temperature input, requiring the [[P6058 | It also has a temperature input, requiring the [[P6058]] temperature probe with a 4-pin [[LEMO S-series connector]]. | ||
The '''DM501 MOD718D''' variant replaced the temperature range with a 200 mV input range providing 10 μV resolution (see [[Media:Physical Measurements Handbook.pdf | Physical Measurements Handbook]]). | The '''DM501 MOD718D''' variant replaced the temperature range with a 200 mV input range providing 10 μV resolution (see [[Media:Physical Measurements Handbook.pdf | Physical Measurements Handbook]]). | ||
Revision as of 02:41, 5 September 2023
The Tektronix DM501 is a 4½ digit multimeter plug-in for the TM500 system.
(See DM501A for the significantly different successor model.)
It also has a temperature input, requiring the P6058 temperature probe with a 4-pin LEMO S-series connector.
The DM501 MOD718D variant replaced the temperature range with a 200 mV input range providing 10 μV resolution (see Physical Measurements Handbook).
Key Specifications
| DC Voltage ranges and accuracy | 2 VDC to 200 VDC in decade ranges (0.1% + 0.01% FS), 1000 VDC (0.1% + 0.02% FS) |
|---|---|
| DC Voltage characteristics | Input resistance 10 MΩ, CMRR >100 dB at DC, 80 dB at 60 Hz (1 kΩ unbal.), NMRR ≥30 dB at 60 Hz + 20 dB/decade |
| AC Voltage ranges and accuracy | 2 VDC to 200 VAC in decade ranges, and 500 VAC (0.7% + 0.01% FS for sine inputs only) |
| AC Voltage characteristics | Input impedance 10 MΩ // ≤70 pF, CMRR unspecified |
| DC Current ranges and accuracy | 2 mA to 2 A in decade ranges, 0.2% + 0.05% FS |
| AC Current ranges and accuracy | 2 mA to 2 A in decade ranges, 0.6% + 0.05% FS (for 40 Hz to 1 kHz sine) |
| Ohms ranges and accuracy | 2 kΩ to 20 MΩ in decade ranges, current 1 mA to 0.1 μA respectively; 0.3% (20 MΩ: 0.5%) + 0.01% FS |
| Temperature range and accuracy | –55°C to +125°C (±1.5°C), +125°C to 150°C (±2.5°C) |
Internals
The DM501 is precise to 4½ digits, but not accurate to 4½ digits. The combination of a D-to-A converter built from opamps and discretes combined with a noisy high-frequency isolated power supply make for barely achievable 3½ digit accuracy over all ranges. Every TM500 DVM after the 501 (including the DM501A, the DM502, and so on) used integrated A-to-D converters and a mains-frequency isolated power supply.
Pictures
-
DM501
-
DM501 open left side
-
DM501 integrator board
-
DM501 integrator board solder side
See also
- Siliconix LD120 and LD121A datasheets
- Fairchild 3814 counter IC
- 307-1015-00 input voltage divider