7S11: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(links, specs) |
||
Line 14: | Line 14: | ||
[[Main_Page#7000_Series|7000-series scopes]]. | [[Main_Page#7000_Series|7000-series scopes]]. | ||
It takes one sampling head, such as the [[ | It takes one sampling head, such as the [[S-1]], [[S-2]], [[S-3]], [[S-4]], [[S-5]] or [[S-6]] | ||
to form a complete vertical plug-in. | to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, | ||
not the plug-in. | |||
For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through contact strips on the side of the plug-in. | For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through | ||
contact strips on the right side of the plug-in. The control signals are routed to a similar | |||
strip on the left of the module for another 7S11 in a dual-channel or X-Y configuration. | |||
==Specifications== | ==Specifications== | ||
{{BeginSpecs}} | |||
{{Spec | Deflection factor | 2 to 200 in 1-2-5 sequence, unit as labelled on the sampling head (usually mV) }} | |||
{{Spec | DC Offset range | +/- 1 V }} | |||
{{Spec | Offset output | 10 × offset voltage, source impedance 10 kΩ}} | |||
{{Spec | Vertical signal output | 200 mV/Div, max. 2.4 V<sub>p-p</sub>, source impedance 10 }} | |||
{{Spec | Delay range | at least 10 ns}} | |||
{{Spec | Weight | 0.9 kg (3.25 lbs) }} | |||
{{EndSpecs}} | |||
==Links== | |||
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/7S11.htm Tek 7S11 page @ amplifier.cd] | |||
* http://www.barrytech.com/tektronix/tek7000/tek7s11.html | |||
==Pictures== | ==Pictures== | ||
Line 26: | Line 42: | ||
File:Tek 7s11 front.jpg | File:Tek 7s11 front.jpg | ||
Image:7S11.jpg|7S11 with inserted S6 sampling head | Image:7S11.jpg|7S11 with inserted S6 sampling head | ||
File:Tek 7s11 spring contact.jpg | File:Tek 7s11 spring contact.jpg | spring-loaded contact block (right) | ||
File:Tek 7s11 right open.jpg | File:Tek 7s11 right open.jpg| right side, cover removed | ||
File:Tek 7s11 left open.jpg | File:Tek 7s11 left open.jpg | left side, cover removed | ||
File:Tek 7s11 right.jpg | File:Tek 7s11 right.jpg | right side | ||
File:Tek 7s11 left.jpg | File:Tek 7s11 left.jpg | left side | ||
</gallery> | </gallery> | ||
Line 36: | Line 52: | ||
[[Category:7000 series vertical plugins]] | [[Category:7000 series vertical plugins]] | ||
[[Category:Sampling plugins]] | [[Category:Sampling plugins]] | ||
Revision as of 07:14, 17 July 2014
The Tektronix 7S11 is a sampling plug-in for
7000-series scopes.
It takes one sampling head, such as the S-1, S-2, S-3, S-4, S-5 or S-6 to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.
For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through contact strips on the right side of the plug-in. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel or X-Y configuration.
Specifications
Key Specifications
Deflection factor | 2 to 200 in 1-2-5 sequence, unit as labelled on the sampling head (usually mV) |
---|---|
DC Offset range | +/- 1 V |
Offset output | 10 × offset voltage, source impedance 10 kΩ |
Vertical signal output | 200 mV/Div, max. 2.4 Vp-p, source impedance 10 |
Delay range | at least 10 ns |
Weight | 0.9 kg (3.25 lbs) |
Links
Pictures
-
-
7S11 with inserted S6 sampling head
-
spring-loaded contact block (right)
-
right side, cover removed
-
left side, cover removed
-
right side
-
left side