P6056: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 20: | Line 20: | ||
* [http://w140.com/tek_P6056_P6057.pdf Tektronix P6056 and P6057 Manual (PDF)] | * [http://w140.com/tek_P6056_P6057.pdf Tektronix P6056 and P6057 Manual (PDF)] | ||
{{BeginSpecs}} | |||
{{Spec | Bandwidth | DC to 3.5 GHz }} | |||
{{Spec | Rise time | 100 ps }} | |||
{{Spec | Attenuation | 10× }} | |||
{{Spec | Input impedance | 500 Ω // approx. 1 pF }} | |||
{{Spec | Scope Input | 50 Ω }} | |||
{{Spec | Features | Readout Pin, ID Button }} | |||
{{EndSpecs}} | |||
[[Category:50 Ohm Oscilloscope Probes]] | [[Category:50 Ohm Oscilloscope Probes]] | ||
[[Category:Introduced in 1972]] | [[Category:Introduced in 1972]] | ||
Revision as of 06:09, 1 November 2015
The Tektronix P6056 is a 3.5 GHz ×10 probe for 50 Ω-input scopes, released along with the 7A19 amplifier in 1972.
It has an Identify switch and readout contact.
Its sister model P6057 has ×100 attenuation.
WARNING:
This high performance device has a fragile resistor assembly in the
probe head, subject to failure in rough usage. Use with slip-on tip
whenever possible. One replacement part is provided with the package.
Contact nearest Field Office for additional parts (P/N 307-0330-00), if
required. For replacement and Calibration Procedure, refer to Pg. 3 & 4
of manual.
Manual
Key Specifications
| Bandwidth | DC to 3.5 GHz |
|---|---|
| Rise time | 100 ps |
| Attenuation | 10× |
| Input impedance | 500 Ω // approx. 1 pF |
| Scope Input | 50 Ω |
| Features | Readout Pin, ID Button |