GR-874 connector: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
mNo edit summary
Line 4: Line 4:


GR-874 connectors are carefully engineered to keep a constant impedance throughout the signal path, by varying connector diameters between free-air
GR-874 connectors are carefully engineered to keep a constant impedance throughout the signal path, by varying connector diameters between free-air
and dielectrically supported sections.  These connectors therefore exhibitvery little reflection and are well suited for gigahertz and pulse applications.
and dielectrically supported sections.  These connectors therefore exhibit very little reflection and are well suited for gigahertz and pulse applications.


They are typically for 50 Ω impedance.  Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing,  
They are typically for 50 Ω impedance.  Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing,  

Revision as of 14:45, 2 May 2017

General Radio 874 (GR-874) connectors are hermaphroditic (asexual) coaxial RF connectors developed by General Radio in the late 1940s, initially for applications up to "4500 Mc" (4.5 GHz).

GR-874 connectors are carefully engineered to keep a constant impedance throughout the signal path, by varying connector diameters between free-air and dielectrically supported sections. These connectors therefore exhibit very little reflection and are well suited for gigahertz and pulse applications.

They are typically for 50 Ω impedance. Versions for 75 Ω and 125 Ω were also available using the same ground shield and housing, but different (thinner) center pin geometry. The Tektronix 519 uses the 125 Ω GR-874 variant.

The regular 50 Ω version is used in the 1S1, 1S2, 3S1, 3S7, 3T7, 4S1, 4S2, 5T1, 5T1A, 5T3, 7M11, N, S-1, S-2, 106, 109, 110, 113, 191, 280, 281, 282, P6051 and possibly others.

Different versions of the connector have different maximum voltage ratings; 1000 V is typical. There are locking and non-locking versions.

By the 1970s, GR-874 connectors were being supplanted by SMA connectors in test equipment, see e.g. the progression from the S-1 to the S-4 sampling heads.

Links

Pictures