D: Difference between revisions
No edit summary |
David Wise (talk | contribs) m (correct discontinuation year based on 1968-69 catalogs) |
||
Line 5: | Line 5: | ||
caption=D front view| | caption=D front view| | ||
introduced=1954 | | introduced=1954 | | ||
discontinued= | discontinued=1969 | | ||
series=[[500-series scopes]]| | series=[[500-series scopes]]| | ||
manuals= | manuals= |
Revision as of 11:13, 2 August 2017
The Tektronix Type D is a differential amplifier plug-in for 500-series scopes.
It has high gain, and the bandwidth depends on the gain, ranging from 2 MHz at 50 mV/div and up, to 300 kHz at 1 mV/div.
It displays the difference between two input signals, with a common-mode rejection ratio of 10,000. It has six tubes, on a shock-mounted subchassis to avoid microphonics.
Type D was introduced with the 531 and 535 in 1954 as Type 53D, was briefly renamed Type 53D/54D in 1955 with the introduction of the 541 and 545, then quickly renamed Type 53/54D, then shortened to Type D in 1959 with the introduction of the 5xxA scopes. Its last year was 1968.
Lavoie Laboratories produced an unauthorized clone, the Lavoie LA-265-D.
Internals
Some production runs used a pair of 5814 tubes at the input while others used 12AU7's. These two tube types have different heater currents, and because the heaters are series-wired, you cannot switch from one type to the other without circuit modification.
Specifications
please add
Pictures
-
-
Front
-
Chassis
-
Rubber support for elimination of microphonics
-
Chassis bottom
-
Early Schematic
-
Late Schematic
-
Late Attenuators
-
Front View (vertical position knob not original)