442: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
* [http://w140.com/tek_442_operators.pdf Tektronix 442 Operators Manual (PDF)] | * [http://w140.com/tek_442_operators.pdf Tektronix 442 Operators Manual (PDF)] | ||
* [http://w140.com/tek_442_service.pdf Tektronix 442 Service Manual (PDF)] | * [http://w140.com/tek_442_service.pdf Tektronix 442 Service Manual (PDF)] | ||
* [[Media:070-2373-00.pdf|Tektronix 442 Operators Manual (PDF, OCR)]] | |||
}} | }} | ||
Revision as of 10:27, 9 August 2018
The Tektronix 442 is a 35 MHz dual-trace oscilloscope with a single timebase.
Specifications
please add
The anode voltage on the CRT is 10 kV and the standard phosphor was P31.
A Tektronix 442 consumes 36 watts and weighs about 20 pounds.
Internals
Serials numbers from B010100 to B010786 use the 154-0729-00 CRT. Starting with serial number B010787, the 154-0804-00 CRT is used.
Triggering is done using a trigger amplifier made of discrete bipolar transistors and a 74S00 TTL quad NAND gate configured as a flip-flop.
The power supply is linear and regulated using op amps as error amplifiers.
The vertical and horizontal amplifiers are made of discrete bipolar transistors except for the dual-JFETs that are used as high-impedance buffers at the signal inputs.
