5000 Series plug-in interface

Tektronix 5000 series oscilloscope mainframes have two vertical plug-in slots, and one horizontal plug-in slots.

The interconnect on either slot type is a 56-pin PCB edge connector.

Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top.

A side B side Pin Function Function 1 +200 V +38 V unreg 2 Utility GND +5 V 3 Line trigger 4 Trig out (H) / Right trig in (V) Left trig in (V) 5 +30 V −30 V 6 +15 V −15 V 7 +plugin signal −plugin signal 8 9 Z Axis A Sweep Intensify 10 A gate Z Axis B Sweep 11 Sample pulse [note 1] Load stop [note 1] 12 Single-sweep mode 13 +plugin signal −plugin signal 14 Clean GND Return Clean GND Return 15 A sweep ALT drive 16 Lockout B sweep Trace separation 17 Lockout A sweep Single sweep reset 18 Chop sense Display on 19 100 μs/div detect Display chop 20 Chop activate 21 −30 V 22 TS7 TS10 23 TS5 TS6 24 Ch. 2 Col Ch. 2 Row / Sweep rate 25 TS3 TS2 26 TS8 TS9 27 TS1 TS4 28 Ch. 1 Col Ch. 1 Row Notes note 1 − 5223 / 5B25N Pin group function legend Plugin power & ground HF signals Readout system signals

Description of signals tba