C: Difference between revisions
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
{{Plugin Sidebar | {{Plugin Sidebar | ||
|manufacturer=Tektronix | |||
summary=Dual-trace 8.5 (24) MHz amplifier | | |type=Type (53)C | ||
image=53-54c-crop.jpg | | |summary=Dual-trace 8.5 (24) MHz amplifier | ||
caption=Tektronix Type C (later version) | | |image=53-54c-crop.jpg | ||
series= | |caption=Tektronix Type C (later version) | ||
introduced=1954 | | |series=500-series scopes | ||
discontinued=1959 | | |introduced=1954 | ||
manuals= | |discontinued=1959 | ||
|manuals= | |||
<!-- * [http://w140.com/tek_fcp/tek_type_c_factory_cal_proc.pdf Factory calibration procedure] --> | <!-- * [http://w140.com/tek_fcp/tek_type_c_factory_cal_proc.pdf Factory calibration procedure] --> | ||
* [http://w140.com/tek-53_54c.pdf Tektronix Type 53/54C Manual (PDF, needs OCR)] | * [http://w140.com/tek-53_54c.pdf Tektronix Type 53/54C Manual (PDF, needs OCR)] |
Revision as of 05:49, 9 August 2021
- Actually, there never was a Type C, but that name is sometimes used as shorthand for the official "Type 53C" and "Type 53/54C" nomenclatures.
The Tektronix Type 53C is a dual-trace plug-in for 500-series scopes. It was introduced along with the 531 and 535 mainframes in 1954. It is very possibly the first dual-trace scope or plugin ever.
Specifications
In the 53x scopes (Tek never documented its performance in the 540's), its bandwidth is 8.5 MHz, and like most letter-series plug-ins, its maximum vertical sensitivity is 50 mV/div. Unlike the Type A and Type B, the Type C had the ability to invert the signal before display.
Type 53C was replaced by Type 53/54C in 1956 when the 541 and 545 were introduced. The Type 53/54C's bandwidth is 24 MHz in those scopes. In 1959 it was replaced by Type CA.
Internals
At 15 tubes, the Type 53/54C and Type CA have the highest tube count of any letter-series plug-in. Each channel consists of a 6AK5 cathode-follower driving a 12AU6 differential pair which drives a 6AU6 differential pair. The two channels converge on a 12AT7 cross-coupled cathode-follower. Four more tubes, a 6AL5 and three 12AT7's, comprise a logic circuit which determines which channel drives the output at any given moment. The options are A, B, CHOPPED, and ALT.
Links
Pictures
-
53C-Plugin´s Front
-
53C-Plugin´s chassis
-
53C-Plugin´s chassis side
-
53/54C-Plugin´s front
-
53/54C-Plugin´s chassis
-
53/54C-Plugin´s chassis bottom
-
Schematic diagram
-
53/54C
-
53/54C
-
53/54C
-
53/54C
-
53/54C
-
53/54C
-
53/54C
-
53/54C