067-0502-01: Difference between revisions
No edit summary |
No edit summary |
||
Line 29: | Line 29: | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Output | {{Spec | Output | DC+, DC-, Squarewave}} | ||
{{Spec | Amplitude | {{Spec | Amplitude range | 0.2 mV to 100 V in 1-2-5 sequence, 5mA in current loop}} | ||
{{Spec | Amplitude | {{Spec | Amplitude accuracy | Within 0.25% into 1 MΩ load}} | ||
{{Spec | Squarewave | {{Spec | Squarewave repetition rate | 1 kHz within 20% }} | ||
{{Spec | Maximum | {{Spec | Maximum input voltage | 100 V }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
Revision as of 09:23, 21 January 2022
The Tektronix 067-0502-01 Amplitude Calibrator and Comparator is an instrument that can be used to produce a reference rectangle voltage or current waveform and/or to compare an external unknown input with an internal or external reference.
The output voltage is only accurate if terminated in 1 MΩ, the 50 V setting will experience the highest error if not properly terminated (0.5% in an open load).
The comparison is performed using an Airpax A175 chopper to switch between the two voltages that are being compared. The resulting output is a rectangular waveform with amplitude equal to the difference of two voltages. This waveform can be amplified using a drift-free AC amplifier and viewed on an oscilloscope for high sensitivity comparison.
See the 067-0502-00 page for a comparison of the -00 and -01 models.
The HV supply uses a tube V427, to regulate the +300V supply. The manual lists V427 as a 7734, a triode-pentode, however some models contain a small circular adapter board (670-1860-00,388-2423-00) to adapt the noval tube socket to a Compactron socket and use a 6G11 double pentode instead. The adapter PCB connects the screen grid and plate of the beam power tube together in a triode configuration. These models also have 6G11 printed below V427 on the chassis.
The output amplitude can be reduced down to 0.2 μV using the 067-0529-00 1000:1 precision divider.
Key Specifications
Output | DC+, DC-, Squarewave |
---|---|
Amplitude range | 0.2 mV to 100 V in 1-2-5 sequence, 5mA in current loop |
Amplitude accuracy | Within 0.25% into 1 MΩ load |
Squarewave repetition rate | 1 kHz within 20% |
Maximum input voltage | 100 V |
Links
Pictures
-
067-0502-01
-
067-0502-01 Schematic
-
067-0502
-
067-0502-01 rear
-
067-0502-01 bottom
-
067-0502-01 front
-
067-0502-01 internal view
-
067-0502-01 internal detail with 6G11 as V427
Some Parts Used in the 067-0502-01
Part | Part Number(s) | Class | Description | Used in |
---|---|---|---|---|
6G11 | 154-0660-00 | Vacuum Tube (Pentode) | double sharp cut-off beam power pentode | 125 • 132 • 519 • 067-0502-01 • 050-0551-00 |