CG5011
The Tektronix CG5011 is a programmable calibration generator plug-in for the TM5000 system.
It is a source of calibrated timing signals, calibrated amplitude voltage and current waveforms, and pulses with low distortion edges, used to calibrate a wide range of oscilloscope parameters, either manually or as part of a GPIB controlled system.
The CG5011 occupies three slots in a TM5006 mainframe. It comes with a 015-0611-00 Programmable Pulse Head (required for operation) and a 015-0310-01 Comparator Head. The cable set p/n is 012-0884-00.
Test modes:
- Vertical Gain
- Horizontal Timing and Gain
- Vertical Bandwidth/Pulse Response Characteristics
- Probe Accuracy and Compensation
- Current-Probe Accuracy
- Calibrator-Output Accuracy
Option 01 adds a temperature compensated, 5 MHz crystal oscillator for a high accuracy time base.