543
The Tektronix Type 543 (rack mount RM43) is an all-tube 30 MHz scope introduced in 1958. It takes letter-series and 1-series plug-ins. It is similar to a 545, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from ×2 to ×100. It has the same six-stage balanced distributed amplifier (twelve 6DK6 tubes) as the 545.
While the 545 has two non-calibrated X-input sensitivities, the 543 has an X-input with three calibrated selectable deflection sensitivities: 0.1 V/cm, 1 V/cm, and 10 V/cm.
The standard CRT for the 543 is the T65 with P2 phosphor, part number 154-175. The standard CRT for the 543B is part number 154-0478-00, also known as the T5470-31-2.
The total acceleration voltage on the CRT is 10 kV. The CRT power supply uses five 5642 HV tube diodes.
The 543B is a tube/transistor hybrid scope. The vertical amplifier has a 6DJ8 cathode follower stage followed by two transistor/tube cascode stages with a 186 Ω delay line inbetween.
Specifications
please add
Pictures
-
543
-
543B with CA
-
543
-
543
-
543
-
543
-
543
-
RM543B
-
RM543B side
-
543B
-
543B
-
543 Block Diagram
-
543 Horizontal Amplifier
-
543 Vertical Amplifier
-
543 Trigger
-
543 Timebase
-
543 Delay Line
-
543 CRT Circuit
-
543 Low-Voltage Power Supply
-
543 Calibrator