2782

The Tektronix 2782 is a spectrum analyzer with a frequency range of 100 Hz to 33 GHz in coax, to 325 GHz with external waveguide mixers.

Tektronix 2782

33 GHz Spectrum Analyzer

Produced from 1990 to 1995

Manuals

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

It has digital storage including non-volatile memory for storing up to 20 separate waveforms with readouts and markers, and up to 20 front-panel control setups. The instrument can selectively count one particular signal out of several that may be present at its input.

Single and delta markers provide direct readout of frequency and amplitude information

Key Specifications

Frequency Range	100 kHz to 33 GHz (to 325 GHz with external waveguide mixer
Resolution Bandwidth	6 dB bandwidths from 3 Hz to 10 MHz (1–3–10)
RF Input impedance	50 Ω, max. +30 dBm CW with ≥10 dB attenuation; max. +47 dBm (50 W) peak pulse, 1 µs and <0.005 duty factor with ≥50 dB attenuation; DC: 0 V, <100 mA continuous with 0 dB attenuation
External Mixer Input	–40 dBm full screen, –20 dBm reference Level, 20 dB mixer conversion loss, 50 Ω with VSWR <1.9:1 at 525 MHz, and <2.2:1 at 3.525 GHz
RF Attenuator	0 dB to 70 dB, 10 dB steps
Reference Level	–140 dBm to +30 dBm; range extends to +60 dBm in overdrive mode
Marker Frequency	100 Hz to 1.2 THz
LO Output Power	≥15 dBm at 8.105 Ghz to 17.9 GHz
Sweep Speed	200 s to 2 µs, 1–2–5
Video Bandwidth	0.03 Hz to 300 kHz (1–3–10), and 10 MHz, ±25%
Triggering	* Internal: AC coupled; 10 Hz to 1 MHz; External: DC coupled; 0 Hz to 5 MHz, or 0 Hz to 1.5 kHz; Line
Displayed Average Noise	−85 dBm to −135 dBm; w/WM782 Waveguide Mixer Series: -75 dBm to -115 dBm
Phase Noise Performance	–105 dBc/Hz at 10 kHz offset up to 21 GHz
Display Dynamic Range	100 dB
Power	90 − 132 V_AC, 47 to 440 Hz or 180 – 250 V_AC, 47 to 63 Hz; 250 W max. (25 W standby)
Weight	20 kg (44 lbs) with std accessories, cover, and no manuals

Front panel: RF INPUT, Planar Crown connector, 50 Ω (Compatible with K or type N connectors); EXTERNAL MIXER, SMA connector (50 Ω) , LO OUTPUT, SMA connector (>+4 dBm, must be terminated); REF SIGNAL OUT, SMA connector (100 MHz 20dBm phase locked to reference oscillator); ACCESSORY IN (general purpose serial data port); PROBE POWER

Rear panel inputs: FREQ REF (IN/OUT), BNC connector (50 Ω, 10 MHz ±5 Hz, 0 to +15 dBm; TRIG/HORIZ IN, BNC connector (0.5 V_p-p trig / 0 to +10 V sweep); ACCESSORY, female DB15 connector; INSTRUMENT BUS, female DB9 connector;

Rear panel outputs: V OUT, H OUT, Z OUT (BNC connectors); IF OUT, BNC connector (50 Ω); PORT 1, PORT 2 – GPIB interfaces

Options

Opt. 16: 49X/275X/279X Series GPIB Language
Opt. 18: WM782 Bands Q, U, V, E, and W (freq coverage from 33-110 GHz)
Opt. 19: WM782 Bands A, U, E, F, G, and J (freq coverage from 26-325 GHz)
Opt. 20: Utility software for PC, includes GPIB card

Software

Links

Documents Referencing 2782

Document	Class	Title	Authors	Year	Links
26W-7044.pdf	Application Note	Pulsed Signal Spectrum Analysis		1989	Spectrum Analyzers • 492BP • 494AP • 2782
26W-7051.pdf	Application Note	Expanding Your Microwave Measurement Window		1989	2782