36,230
edits
No edit summary |
mNo edit summary |
||
(2 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
[[File:Tek 067-0502-01.JPG | thumb | 350px |right]] | [[File:Tek 067-0502-01.JPG | thumb | 350px |right]] | ||
The '''Tektronix 067-0502- | The '''Tektronix 067-0502-01 Amplitude Calibrator and Comparator''' is an instrument that can be used to produce a reference rectangle | ||
voltage or current waveform and/or to compare an external unknown input with an internal or | voltage or current waveform and/or to compare an external unknown input with an internal or | ||
external reference. The output voltage is only accurate if terminated in 1 MΩ, the 50 V setting will experience the highest error if not properly terminated (0.5% in an open load). | external reference. The output voltage is only accurate if terminated in 1 MΩ, the 50 V setting will experience the highest error if not properly terminated (0.5% in an open load). | ||
Line 12: | Line 12: | ||
See the [[067-0502-00]] page for a comparison of the -00 and -01 models. | See the [[067-0502-00]] page for a comparison of the -00 and -01 models. | ||
The HV supply uses a tube V427, to regulate the +300V supply. The manual lists V427 as a [[7734]], a triode-pentode, however some models contain a small circular adapter board (670-1860-00,388-2423-00) to adapt the [[B9A_base|noval tube socket]] to a [[Compactron_base|Compactron socket]] and use a 6G11 double pentode instead. The adapter PCB connects the screen grid and plate of the beam power tube together in a triode configuration. These models also have 6G11 printed below V427 on the chassis. | The HV supply uses a tube V427, to regulate the +300V supply. The manual lists V427 as a [[7734]], a triode-pentode, however some models contain a small circular adapter board (670-1860-00,388-2423-00) to adapt the [[B9A_base|noval tube socket]] to a [[Compactron_base|Compactron socket]] and use a [[6G11]] double pentode instead. The adapter PCB connects the screen grid and plate of the beam power tube together in a triode configuration. These models also have [[6G11]] printed below V427 on the chassis. | ||
The output amplitude can be reduced down to | The output amplitude can be reduced down to 0.2 μV using the [[067-0529-00]] 1000:1 precision divider. | ||
{{BeginSpecs}} | {{BeginSpecs}} |