442: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (→top: clean up, replaced: {{Oscilloscope Sidebar → {{Oscilloscope Sidebar |manufacturer=Tektronix |designers=, title=Tektronix → model=) |
||
| Line 1: | Line 1: | ||
{{Oscilloscope Sidebar | | {{Oscilloscope Sidebar |manufacturer=Tektronix |designers= | | ||
model= 442 | | |||
summary=35 MHz dual-trace scope | | summary=35 MHz dual-trace scope | | ||
image=Tek 442 1.jpg | | image=Tek 442 1.jpg | | ||
Revision as of 07:49, 9 August 2021
The Tektronix 442 is a 35 MHz dual-trace oscilloscope with a single timebase.
Specifications
please add
The anode voltage on the CRT is 10 kV and the standard phosphor was P31.
A Tektronix 442 consumes 36 watts and weighs about 20 pounds.
Internals
Serials numbers from B010100 to B010786 use the 154-0729-00 CRT. Starting with serial number B010787, the 154-0804-00 CRT is used.
Triggering is done using a trigger amplifier made of discrete bipolar transistors and a 74S00 TTL quad NAND gate configured as a flip-flop.
The power supply is linear and regulated using op amps as error amplifiers.
The vertical and horizontal amplifiers are made of discrete bipolar transistors except for the dual-JFETs that are used as high-impedance buffers at the signal inputs.
