500 Series plug-in interface: Difference between revisions

Revision as of 10:16, 25 June 2018

The plug-in interface of the 500-series scopes is a single 16-pin Amphenol connector.

Pin	Function	Comment
1	+Signal	100 mV/cm, bias +67.5 V ±2%
2	Ground
3	−Signal	100 mV/cm, bias +67.5 V ±2%
4	Int Trig GND	544, 546, 547, 549, 556, late 555 only
5	Int Trig +	544, 546, 547, 549, 556, late 555 only
6	Sawtooth	556 only, others n/c
7	Slave Pulse out	547 only
8	Multi-trace sync	Cathode; grounded by CA, M etc. in Alt Trace mode
9	−150 V	min. 3.8 mA, max. 60 mA
10	+100 V	min. 4.5 mA, max. 50 mA
11	+225 V	min. 16 mA, max. 75 mA
12	+350 V	min. 0 mA, max. 20 mA
13	6.3 V_AC	plug-in AC heater supply, max. 2.8 A
14	6.3 V_AC	return for pin 13
15	+75 V	min./max. 150 mA for DC series heaters and LV supply
16	Multi-trace sync	Anode

DC power

AC and heater power

Deflection and Trigger Signals

Control Signals

Revision as of 10:15, 25 June 2018 (view source) Peter (talk \| contribs) mNo edit summary ← Older edit		Revision as of 10:16, 25 June 2018 (view source) Peter (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	[[File:500 series plugin interface V.png\|thumb\|450px\|right\|click to enlarge]]		[[File:500 series plugin interface V.png\|thumb\|450px\|right\| Plug-in pinout from [[535]] schematic - click to enlarge]]

	The '''plug-in interface of the [[500-series scopes]]''' is a single 16-pin Amphenol connector.		The '''plug-in interface of the [[500-series scopes]]''' is a single 16-pin Amphenol connector.