7000-series Sampling Shoe: Difference between revisions
(Created page with "<gallery> Tek 7s11 spring contact.jpg|7S11 Tek 7s11 right.jpg|7S11 Tek-7t11-left.jpg|7T11 7s12-left-cover.jpg|7S12 7s12-left.jpg|7S12 </gallery>") |
mNo edit summary |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[File:7000 series sampling shoe pinout.jpg|thumb|400px|right|7K sampling shoe connections on [[7S11]]]] | |||
The sampling plug-ins in the 7000 series have a special PCB-based '''"sampling shoe" connector''' at the side of the module that routes sampling drive and trigger signals between the plug-in that functions as a sampling timebase (either a [[7T11]] or a [[7S12]]) and [[7S11]] sampler(s). | |||
Possible combinations are a 7T11 with one or two 7S11s, a pair of 7S11s in free-running X/Y mode, or a 7S11 attached to a 7S12 as an optional second channel. (NB - the [[7S14]] dual channel sampling plug-in is self-contained and does not have the shoe contacts.) | |||
On the timebase side, the contacts are provided through pads on a vertically mounted PCB on the left side of the plug-in. | |||
The 7S11 has a spring-loaded plastic carrier with a PCB carrying contact fingers on the right side, and the same fixed connector as the timebase on the left, where a second 7S11 can attach. | |||
<gallery> | <gallery> | ||
Tek 7s11 spring contact.jpg|7S11 | Tek 7s11 spring contact.jpg| [[7S11]] | ||
Tek 7s11 right.jpg|7S11 | Tek 7s11 right.jpg|7S11 | ||
Tek-7t11-left.jpg|7T11 | Tek-7t11-left.jpg| [[7T11]] | ||
7s12-left-cover.jpg|7S12 | 7s12-left-cover.jpg| [[7S12]] | ||
7s12-left.jpg|7S12 | 7s12-left.jpg|7S12 | ||
</gallery> | </gallery> | ||
[[Category:Plug-in interfaces]] |
Latest revision as of 23:24, 12 June 2018
The sampling plug-ins in the 7000 series have a special PCB-based "sampling shoe" connector at the side of the module that routes sampling drive and trigger signals between the plug-in that functions as a sampling timebase (either a 7T11 or a 7S12) and 7S11 sampler(s).
Possible combinations are a 7T11 with one or two 7S11s, a pair of 7S11s in free-running X/Y mode, or a 7S11 attached to a 7S12 as an optional second channel. (NB - the 7S14 dual channel sampling plug-in is self-contained and does not have the shoe contacts.)
On the timebase side, the contacts are provided through pads on a vertically mounted PCB on the left side of the plug-in. The 7S11 has a spring-loaded plastic carrier with a PCB carrying contact fingers on the right side, and the same fixed connector as the timebase on the left, where a second 7S11 can attach.
-
7S11
-
7S12