7A16P: Difference between revisions

Revision as of 19:46, 12 August 2020

The Tektronix 7A16P is a single channel, programmable, vertical amplifier for 7000-series digitizing mainframes. All functions of the 7A16P can be remotely programmed via the GPIB 7000-series main interface bus, with exception of the variable gain control and the probe identify switch. It is special among the 7000-series vertical amplifiers since it offers a switchable 1 MΩ/50 Ω input impedance, only paralleled by the 7A42. The 7A16P is also unique as it has two input BNC connectors, but is strictly a single channel plugin, but having a switch that routes one of the BNC connectors to the amplifier circuits. This feature is handy in remote-controlled digitizing applications.

It was mainly intended for use in the 7612D and the 7912 family, but can also be used in the 7854 if paired with a 021-0374-00 and internally modified by adding cables for a 18 pin header and setting jumpers correctly.

Key Specifications

Bandwidth 1 MΩ	0 – 150 MHz
Bandwidth 50 Ω	0 – 200 MHz
Deflection	10 mV/Div to 5 V/Div in 1–2–5 sequence
Input impedance	1 MΩ
Features	Two BNC inputs 20 MHz bandwidth limit switch Invert switch Probe multiplier / Identify switch sensing inputs

Internals

The input stage of the 7A16P contains miniature relays switching between the two available input connectors and selecting the AC and DC coupling modes. Another relay is used to enter a shunt 50 Ω load if the corresponding input impedance is selected. Relays then select an optional 10x attenuator before entering the input buffer. This buffer contains an AC coupled MOSFET common drain amplifier and a DC coupled operational amplifier, creating a feed-beside scheme. Gain switching is accommodated by several junction FETs to enter another 10x attenuator in front of the MOSFET buffer, and to enter 2x and 5x low impedance attenuators after the input buffer.

Links

Pictures

7A16P front panel
7A16P left internal
7A16P right internal
7A16P right internal modified with cables for connection to 021-0374-00.
7A16P right internal modified for 021-0374-00, detail.

Firmware (uploaded BIN files)

160-1511-00.bin (U30630 and U31630 in 7A16P)
160-1512-00.bin (U30830 and U31830 in 7A16P)

@@ Line 1: / Line 1: @@
 {{Plugin Sidebar 2|
 title=Tektronix 7A16P |
-summary=150/225 MHz vertical amplifier |
+summary=150/200 MHz vertical amplifier |
 image=Tek 7a16p.jpg |
 caption=7A16A |
@@ Line 13: / Line 13: @@
 }}
-The '''Tektronix 7A16P''' is a single channel, programmable, vertical amplifier for [[:Category:7000_series_digitizer_mainframes|7000-series digitizing mainframes]]. All functions of the 7A16P can be remotely programmed via the [[GPIB]] 7000-series main interface bus, with exception of the variable gain control and the probe identify switch. It is special among the 7000-series vertical amplifiers since it offers a switchable 1 MΩ/50 Ω input impedance, only paralleled by the [[7A42]]. The 7A16P is also unique as it has two input BNC connectors, but is strictly a single channel plugin.
+The '''Tektronix 7A16P''' is a single channel, programmable, vertical amplifier for [[:Category:7000_series_digitizer_mainframes|7000-series digitizing mainframes]]. All functions of the 7A16P can be remotely programmed via the [[GPIB]] 7000-series main interface bus, with exception of the variable gain control and the probe identify switch. It is special among the 7000-series vertical amplifiers since it offers a switchable 1 MΩ/50 Ω input impedance, only paralleled by the [[7A42]]. The 7A16P is also unique as it has two input BNC connectors, but is strictly a single channel plugin, but having a switch that routes one of the BNC connectors to the amplifier circuits. This feature is handy in remote-controlled digitizing applications.
 It was mainly intended for use in the [[7612D]] and the [[7912|7912 family]], but can also be used in the [[7854]] if paired with a [[021-0374-00]] and internally modified by adding cables for a 18 pin header and setting jumpers correctly.
@@ Line 31: / Line 31: @@
 ==Internals==
+The input stage of the 7A16P contains miniature relays switching between the two available input connectors and selecting the AC and DC coupling modes. Another relay is used to enter a shunt 50 Ω load if the corresponding input impedance is selected. Relays then select an optional 10x attenuator before entering the input buffer. This buffer contains an AC coupled MOSFET common drain amplifier and a DC coupled operational amplifier, creating a feed-beside scheme. Gain switching is accommodated by several junction FETs to enter another 10x attenuator in front of the MOSFET buffer, and to enter 2x and 5x low impedance attenuators after the input buffer.
 ==Links==