7S11: Difference between revisions

Revision as of 07:14, 17 July 2014

{{{manufacturer}}} Vertical Amplifier
Sampling plugin 7S11 front view (empty sampling head bay) Compatible with [[7000-series scopes]] Produced from {{{introduced}}} to {{{discontinued}}} Manuals Tektronix 7S11 Manual (OCR, PDF) (All manuals in PDF format unless noted otherwise) [[Category:Introduced in {{{introduced}}}]]

Manuals – Specifications – Links – Pictures

The Tektronix 7S11 is a sampling plug-in for 7000-series scopes.

It takes one sampling head, such as the S-1, S-2, S-3, S-4, S-5 or S-6 to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.

For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through contact strips on the right side of the plug-in. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel or X-Y configuration.

Specifications

Key Specifications

Deflection factor	2 to 200 in 1-2-5 sequence, unit as labelled on the sampling head (usually mV)
DC Offset range	+/- 1 V
Offset output	10 × offset voltage, source impedance 10 kΩ
Vertical signal output	200 mV/Div, max. 2.4 V_p-p, source impedance 10
Delay range	at least 10 ns
Weight	0.9 kg (3.25 lbs)

Links

Pictures

7S11 with inserted S6 sampling head
spring-loaded contact block (right)
right side, cover removed
left side, cover removed
right side
left side

@@ Line 14: / Line 14: @@
 [[Main_Page#7000_Series|7000-series scopes]].
-It takes one sampling head, such as the [[S1]], [[S2]], [[S3]], [[S4]], [[S5]] or [[S6]]
+It takes one sampling head, such as the [[S-1]], [[S-2]], [[S-3]], [[S-4]], [[S-5]] or [[S-6]]
-to form a complete vertical plug-in.  The bandwidth and sensitivity is determined by the sampling head, not the plug-in.
+to form a complete vertical plug-in.  Bandwidth and sensitivity are determined by the sampling head,
+not the plug-in.
-For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through contact strips on the side of the plug-in.
+For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through
+contact strips on the right side of the plug-in.  The control signals are routed to a similar
+strip on the left of the module for another 7S11 in a dual-channel or X-Y configuration.
 ==Specifications==
+{{BeginSpecs}}
+{{Spec | Deflection factor | 2 to 200 in 1-2-5 sequence, unit as labelled on the sampling head (usually mV) }}
+{{Spec | DC Offset range | +/- 1 V }}
+{{Spec | Offset output | 10 × offset voltage, source impedance 10 kΩ}}
+{{Spec | Vertical signal output | 200 mV/Div, max. 2.4 V<sub>p-p</sub>, source impedance 10 }}
+{{Spec | Delay range | at least 10 ns}}
+{{Spec | Weight | 0.9 kg (3.25 lbs) }}
+{{EndSpecs}}
+==Links==
+* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/7S11.htm Tek 7S11 page @ amplifier.cd]
+* http://www.barrytech.com/tektronix/tek7000/tek7s11.html
 ==Pictures==
@@ Line 26: / Line 42: @@
 File:Tek 7s11 front.jpg
 Image:7S11.jpg|7S11 with inserted S6 sampling head
-File:Tek 7s11 spring contact.jpg
+File:Tek 7s11 spring contact.jpg | spring-loaded contact block (right)
-File:Tek 7s11 right open.jpg
+File:Tek 7s11 right open.jpg| right side, cover removed
-File:Tek 7s11 left open.jpg
+File:Tek 7s11 left open.jpg | left side, cover removed
-File:Tek 7s11 right.jpg
+File:Tek 7s11 right.jpg | right side
-File:Tek 7s11 left.jpg
+File:Tek 7s11 left.jpg  | left side
 </gallery>
@@ Line 36: / Line 52: @@
 [[Category:7000 series vertical plugins]]
 [[Category:Sampling plugins]]
-[[Category:Specifications needed]]