5111
(Redirected from D11)
The Tektronix 5111 (aka 5103/D11) is a 2 MHz CRT storage scope that uses 5000-series plug-ins.
The 5111 has an 8×10 division CRT (154-0634-11) where each division is 1.27 cm (0.5 in) instead of the usual 1 cm.
The 5111 MOD710R modification (L vs R X-Y mode}, with a 5B10 MOD711C Time Base Plug-in, hen combined with any two identical vertical amplifiers (i.e.,5A15, 5A18, 5A22), allow horizontal (X) deflection from the center plug-in compartment or time base deflection from the right-hand compartment.
Key Specifications
| Storage Writing Speed | At least 20 div/ms |
|---|
Options
- Opt. 2: Protective front cover
- Opt. 3: Faster stored writing speed CRT (154-0634-12)
- Opt. 7: X/Y output signals for plotters
Links
- Oscilloscope Tektronix 5103N 5111 single beam storage 4ch Teardown by Thomas Scherrer @ YouTube
Documents referencing 5111
Pictures
5111
5111A
-
-
with Hocking Phasec D6
-
-
-
-
RHS
Components
Some Parts Used in the 5111
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 154-0634-xx | 154-0634-01 • 154-0634-03 • 154-0634-10 • 154-0634-11 • 154-0634-12 | CRT | direct-view storage CRT | 5111 • 603 • D11 |
